In the hybrid bonding process, the final stage of chemical mechanical polishing plays a critical role. It is essential to ensure that the copper surface is recessed slightly from the oxide surface. However, this recess can lead to the occurrence of interfacial voids between the bonded copper interfaces. To examine the effects of copper film thickness on bonding quality and bonding mechanisms in this study, artificial voids were intentionally introduced at the bonded interfaces at temperatures of 250 °C and 300 °C. The results revealed that as the thickness of the copper film increases, there is an increase in the bonding fraction and a decrease in the void fraction. The variations in void height with different copper film thicknesses were influenced by the bonding mechanism and bonding fraction.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11084831 | PMC |
| http://dx.doi.org/10.3390/ma17092150 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Silicon Nanotube Anode on Copper Foils for Li-Ion Batteries.
ACS Appl Mater Interfaces
January 2025
Department of Chemical Engineering and Conn Center for Renewable Energy ResearchUniversity of Louisville, 132 Eastern Parkway, Louisville, Kentucky 40292, United States.
We report a silicon anode for lithium-ion batteries consisting of a layer of 100% nanotubes directly bonded to copper foil. The process involved silicon deposition on a sacrificial zinc oxide nanorod film and removal of zinc oxide to produce a nanotube film directly on thin copper foils. The thickness of resulting films ranged from 9 to 20 μm with Si nanotubes having diameters of 200-400 nm and lengths of 2-10 μm.
View Article and Find Full Text PDFEpitaxial CuO Thin Films Deposited from Solution: the Enabling Role of Cu Diffusion into the GaAs Substrate.
ACS Appl Mater Interfaces
January 2025
Department of Materials Engineering, Ben-Gurion University of the Negev, Beer-Sheva 8410501, Israel.
Cuprous oxide (CuO) thin films were chemically deposited from a solution onto GaAs(100) and (111) substrates using a simple three-component solution at near-ambient temperatures (10-60 °C). Interestingly, a similar deposition onto various other substrates including Si(100), Si(111), glass, fluorine-doped tin oxide, InP, and quartz resulted in no film formation. Films deposited on both GaAs(100) and (111) were found alongside substantial etching of the substrates.
View Article and Find Full Text PDFInfluence of Deposition Temperature on Cu-BDC Surface-Anchored Metal-Organic Framework Formation.
J Phys Chem C Nanomater Interfaces
January 2025
Furman University, Greenville, South Carolina 29613, United States.
Surface-anchored metal-organic frameworks (surMOFs) are crystalline, nanoporous, supramolecular materials mounted to substrates that have the potential for integration within device architectures relevant for a variety of electronic, photonic, sensing, and gas storage applications. This research investigates the thin film formation of the Cu-BDC (copper benzene-1,4-dicarboxylate) MOF system on a carboxylic acid-terminated self-assembled monolayer by alternating deposition of solution-phase inorganic and organic precursors. X-ray diffraction (XRD) and atomic force microscopy (AFM) characterization demonstrate that crystalline Cu-BDC thin films are formed via Volmer-Weber growth.
View Article and Find Full Text PDFEnhanced two-temperature model and its application in comprehensive analysis of femtosecond laser melting of gold, copper and their alloys.
Phys Chem Chem Phys
January 2025
Theoretical Physics Section, Bhabha Atomic Research Centre, Mumbai-400085, India.
Extensive research on ultrashort laser-induced melting of noble metals like Au, Ag and Cu is available. However, studies on laser energy deposition and thermal damage of their alloys, which are currently attracting interest for energy harvesting and storage devices, are limited. This study investigates the melting damage threshold (DT) of three intermetallic alloys of Au and Cu (AuCu, AuCu and AuCu) subjected to single-pulse femtosecond laser irradiation, comparing them with their constituent metals.
View Article and Find Full Text PDFOn Demand Copper Electrochemical Deposition on Laser Induced Graphene for Flexible Electronics.
Small
January 2025
Department of Precision Instrument, Tsinghua University, Beijing, 100084, China.
The rapid development of flexible electronics necessitates simplified processes that integrate heterogeneous materials and structures. In this study, laser engraving is combined with electrochemical deposition (ECD) to directly fabricate various micro/nano-structured components and flexible electronic circuits. A theoretical framework and simulation model are developed to design the on-demand ECD on laser induced graphene (LIG), enabling the generation of multi-scale copper (Cu) materials with controllable oxidation states.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!