Fabrication of melamine formaldehyde/graphene oxide composite for efficient static and dynamic adsorption of lead ions from aqueous medium.

The present work discusses the synthesis, characterization, and environmental applications of graphene oxide (GO), melamine formaldehyde resin (MF), and melamine formaldehyde/graphene oxide composite (MGO) for the efficient removal of Pb from aqueous medium via batch and column procedures. TGA, XRD, TEM, zeta potential, nitrogen adsorption/desorption, ATR-FTIR, and other characterization techniques revealed that MGO is characterized by a greater surface area (609 m/g), total pore volume (1.0106 cm/g), pH (6.5), and the presence of various surface chemical functional groups. The synthesized solid adsorbents were used in both static and dynamic adsorption processes to remove Pb, with varying application parameters such as pH, starting concentration, adsorbent dosage, and shaking time in the case of static adsorption method. While through the column adsorption process the effects of column bed height, flow rate, and starting Pb were taken into consideration. Results of the batch adsorption demonstrated that MGO had the highest Langmuir adsorption capacity (201.5 mg/g), and the adsorption fit the nonlinear Langmuir adsorption model and Elovich kinetic models. The adsorption of Pb onto all prepared solid materials is endothermic, spontaneous, and physical in nature, as demonstrated by thermodynamic studies. Column adsorption of Pb well fitted by Thomas and Yoon Nelson nonlinear adsorption models. MGO showed a maximum column adsorption capacity of 168 mg/g when applying 4 cm, 15 mL/min, and 150 mg/L as bed height, flow rate, and initial Pb, respectively. With only a 12.6% reduction in its adsorption capacity, column regeneration showed that MGO exhibited a high degree of reusability even after five cycles of adsorption/desorption studies.