Evaluating UV-C Sensitivity of in Model Buffer Solution Using a UV-C Light-Emitting-Diode System.

, responsible for boxwood blight, produces sticky conidia that pose a contamination risk in boxwood production via cross-contamination from tools, equipment, and other resources. This study evaluated UV-C light-emitting-diode (LED) irradiation (263 to 287 nm) as a disinfection method by examining its effectiveness in inactivating conidia and determining the UV-C sensitivity. Conidial suspensions were exposed to quantifiable UV-C doses under a dynamic stirring condition. Average volumetric intensity was quantified by accounting for UV gradients and UV dose was calculated as a product of average fluence rate (mW⋅cm) and exposure time (s). UV-C irradiation effectively inactivated the tested pathogen following log-linear + shoulder kinetics as identified by parameters of goodness of model fit (i.e., high and low root mean square error [RMSE] values). The model predicted the UV sensitivity of conidia as 46.6 mJ⋅cm per log. A total of 2.04 log reductions of the population could be obtained by an exposure of 60 mJ⋅cm of UV-C dose. The calculated decimal reduction dose (D) was 13.53 ± 0.98 mJ⋅cm ( = 0.97, RMSE = 0.14), inactivation rate constant () = 0.17 ± 0.01, and shoulder length = 33.06 ± 1.81 mJ⋅cm. These findings indicate that UV-C irradiation could be a viable option for disinfecting tools, equipment, and possibly propagation cuttings in nurseries.