The preparation of an environmentally friendly and efficient flocculant for solid-liquid separation in industrial wastewater is highly important. In this study, a novel cationic flocculant (AL-g-PAMA) was synthesized by a thermal initiation method using alkali lignin (AL) as the main chain and acrylamide (AM) and methacrylamido propyl trimethyl ammonium chloride (MAPTAC) as the grafted side chains. The structure, thermal stability, and surface morphology of the copolymers were investigated by various characterization methods. The results indicated the successful synthesis of AL-g-PAMA. AL-g-PAMA was applied to improve solid-liquid separation in kaolin suspensions. The results showed that AL-g-PAMA had excellent flocculation-sedimentation and dewatering efficiency. When the dosage of AL-g-PAMA #5 was 600.0 g/t, the thickness of the compressed layer was 2.2 cm, the floc settling velocity was 24.1 cm/min, and the transmittance of the supernatant was 84.0%. The moisture content of the filter cake decreased from 55.0% to 43.4% after treatment with AL-g-PAMA #5. The results of zeta potential and focused beam reflectance measurement (FBRM) analysis indicated that bridging and electroneutralization were the main flocculation mechanisms. Therefore, this study extends the potential for using lignin as a bioflocculant and provides a feasible approach to efficiently purify high-turbidity wastewater.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11054052PMC
http://dx.doi.org/10.3390/polym16081131DOI Listing

Publication Analysis

Top Keywords

cationic flocculant
8
solid-liquid separation
8
al-g-pama
6
preparation lignin-based
4
lignin-based cationic
4
flocculant application
4
application kaolin
4
kaolin suspension
4
suspension treatment
4
treatment preparation
4

Similar Publications

In order to solve the shortcomings of a single flocculant, the inorganic-organic hybrid flocculant SiO-CTS-DMDACC was successfully prepared by grafting copolymerization of chitosan (CTS), dimethyl diallyl ammonium chloride (DMDACC), and silicon dioxide (SiO). The performance of SiO-CTS-DMDACC in treating papermaking wastewater was investigated, and the mechanism of the flocculation process was analyzed. The results showed that the crystallinity of chitosan was reduced due to the introduction of DMDACC and SiO.

View Article and Find Full Text PDF

In agricultural and waste management systems, dairy manure wastewater is often recycled for irrigation. However, a key challenge lies in handling suspended solids (SS) and effectively dewatering sludge. To address this, an innovative polycationic soybean protein-based flocculant (SPI+) was developed and applied to enhance flocculation and sludge dewatering efficiency.

View Article and Find Full Text PDF

To investigate the influence of cations on the microstructural characteristics of electrochemical reinforcement in soft clay, a study was conducted using three different cationic salt solutions-NaCl, CaCl₂, and FeCl₃-for grouting treatment. Four sets of indoor experiments were performed to examine the reinforcement mechanism of the electrochemical method. The findings indicate that increasing the valence of injected cations significantly affects the electrochemical reinforcement effect and the soil's microstructural properties.

View Article and Find Full Text PDF

Cationic polymers have the unique ability to neutralize negative charge with practical applications in personal care products, such as shampoos, conditioners, contact lens solutions, and as flocculants in wastewater treatment processes. Cationic polymers are a diverse class of materials varying in structural composition, cationic charge density (CD), and molecular weight (MW). In this study, we investigated three classes of polyquaternium cationic polymers (PQ-6, PQ-10, PQ-16) of varying CD and MW to characterize their toxicity to aquatic invertebrates.

View Article and Find Full Text PDF
Article Synopsis
  • - This study focuses on Pichia manshurica, a yeast responsible for spoiling fermented foods, and examines how a treatment combining dielectric barrier discharge cold plasma (DBD) with lactate can effectively reduce its growth and biofilm formation.
  • - Results showed that while control and lactate alone had minimal effects, DBD reduced the yeast's survival rate significantly, and the combination of DBD with lactate completely inhibited both growth and biofilm formation.
  • - The research also involved transcriptomic analysis, revealing that DBD disrupts functions related to DNA replication and cell adhesion, while lactate enhances the inactivation effects by promoting redox reactions and inhibiting lipid synthesis pathways.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!