Numerical Simulation Study on Impact Initiation on Shielded Charge Using Hypervelocity Composite-Structure Reactive Fragments.

In order to study the impact initiation process and mechanism of hypervelocity PTFE/Al composite structure reactive fragments on a shielded charge, first, an existing PTFE/Al reactive fragment hypervelocity collision experiment was numerically simulated using the SPH algorithm in ANSYS/AUTODYN 17.0 software. Then, the Lee-Tarver model was verified to describe the detonation reaction behavior and explosion damage effect of reactive materials. A numerical simulation analysis of the impact of two kinds of ultra-high-speed PTFE/Al composite-structure reactive fragments on a shielded charge was carried out using the SPH algorithm. These were steel-coated PTFE/Al and steel-semi-coated PTFE/Al fragments, and they were compared with the impact of steel fragments. The results indicate that the threshold velocities of the impact initiation of the two composite-structure reactive fragments on the shielded charge were both 2.6 km/s, while the threshold velocity of the steel fragment was 2.7 km/s. Under the threshold velocity condition, the two composite-structure reactive fragments increase the time and intensity of the compressed shock wave pulse in the explosive due to the impact energy release effect of the reactive materials, causing the shielded charge to detonate under the continuous long-term pulse loads. However, the mechanism of the steel fragment on the shielded charge belongs to the shock-detonation transition. The research results can provide scientific references for the design of hypervelocity reactive fragments and the study of their damage mechanism.