Effects of a rainwater harvesting system on the soil water, heat and growth of apricot in rain-fed orchards on the Loess Plateau.

Rainwater is the main water source in arid and semiarid areas of the Loess Plateau, where rainfall is generally insufficient, ineffective and underutilized during the growing season. Thus, improving rainwater utilization efficiency is essential for sustainable agricultural development. A new system composed of rainwater harvesting, an infiltrator bucket with multiple holes and mulching (RHM), was designed to maintain soil moisture at a proper level in rain-fed orchards in arid and semiarid areas of the Loess Region of China. However, there is a lack of clarity on the effectiveness of RHM. In this study, changes in the soil environment and the growth and physiology of apricot trees were monitored via two treatments: (1) Rain-harvesting irrigation system (RHM) treatment and (2) traditional orchard treatment (CK) as a baseline. The results showed that (1) RHM could effectively improve soil water storage at depths of 0-45 cm and at a horizontal distance of 40 cm from the trunk. For the 1.4 mm light rain event, the soil water content increased by 6.3-12%, and for the two moderate rains, the soil water content increased by 12-25%. The change in the soil relative water content predicted by the LSTM model is consistent with the overall trend of the measured value and gradually decreases, and the prediction accuracy is high, with an error of 0.65. (2) The average soil temperatures at 5 cm, 20 cm and 40 cm under RHM were 17.0% (2.4 °C), 13.6% (1.9 °C) and 7.5% (1 °C) greater than those under CK, respectively. (3) Compared with the control treatment, RHM improved the growth and WUEL of apricot trees. The results highlighted the efficiency of the RHM system in enhancing the soil environment and regulating the growth and physiology of apricot trees, which has greater popularization value in arid and semiarid areas.