The expanding urbanization of coastal areas has led to increased ocean sprawl, which has had both physical and chemical adverse effects on marine and coastal ecosystems. To maintain the health and functionality of these ecosystems, it is imperative to develop effective solutions. One such solution involves the use of biodegradable polymers as bioactive coatings to enhance the bioreceptivity of marine and coastal infrastructures. Our study aimed to explore two main objectives: (1) investigate PHA-degrading bacteria on polymer-coated surfaces and in surrounding seawater, and (2) comparing biofilm colonization between surfaces with and without the polymer coating. We applied poly(3-hydroxybutyrate) [P(3HB)) coatings on concrete surfaces at concentrations of 1% and 6% w/v, with varying numbers of coating cycles (1, 3, and 6). Our findings revealed that the addition of P(3HB) indeed promoted accelerated biofilm growth on the coated surfaces, resulting in an occupied area approximately 50% to 100% larger than that observed in the negative control. This indicates a remarkable enhancement, with the biofilm expanding at a rate roughly 1.5 to 2 times faster than the untreated surfaces. We observed noteworthy distinctions in biofilm growth patterns based on varying concentration and number of coating cycles. Interestingly, treatments with low concentration and high coating cycles exhibited comparable biofilm enhancements to those with high concentrations and low coating cycles. Further investigation into the bacterial communities responsible for the degradation of P(3HB) coatings identified mostly common and widespread strains but found no relation between the concentration and coating cycles. Nevertheless, this microbial degradation process was found to be highly efficient, manifesting noticeable effects within a single month. While these initial findings are promising, it's essential to conduct tests under natural conditions to validate the applicability of this approach. Nonetheless, our study represents a novel and bio-based ecological engineering strategy for enhancing the bioreceptivity of marine and coastal structures.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11025745 | PMC |
http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0300929 | PLOS |
Water Environ Res
January 2025
Zhejiang Key Laboratory of Petrochemical Environmental Pollution Control, Zhejiang Ocean University, Zhoushan, P. R. China.
The discharge of oil-laden wastewater from industrial processes and the frequent occurrence of oil spills pose severe threats to the ecological environment and human health. Membrane materials with special wettability have garnered attention for their ability to achieve efficient oil-water separation by leveraging the differences in wettability at the oil-water interface. These materials are characterized by their simplicity, energy efficiency, environmental friendliness, and reusability.
View Article and Find Full Text PDFSci Rep
January 2025
Department of Biology, Rasht Branch, Islamic Azad University, Rasht, Iran.
The current chemotherapy treatments for liver cancer have shown limited effectiveness. Therefore, there is an urgent need to develop new drugs to combat this disease more effectively. This study reports synthesis of cobalt oxide nanoparticles coated with glucose, and conjugated with Ellagic acid.
View Article and Find Full Text PDFLangmuir
January 2025
Department of Mechanical Engineering, Gachon University, 1342 Seongnamdaero, Sujeong-gu, Seongnam-si, Gyeonggi-do 13120, Republic of Korea.
LiFePO (LFP) typically requires a conductive additive to improve its low ion and electron conductivity. In this study, we achieved significant enhancements in Li and electron mobility by applying a minimal amount of conductive material through a new coating process. The coin cell demonstrated an excellent capacity of 157.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo 454003, China.
Nickel (Ni) single-layer coatings were electrodeposited under varying pulse periods (T), duty cycles (θ), and average current densities (i) using four distinct pulse current waveforms: rectangular (Rec), triangular (Tri), ramp-up triangular (Rup), and ramp-down triangular (Rdn). This study demonstrated, through dynamic polarization curves and surface morphology analysis, that single-layer coatings showed relatively good corrosion resistance when deposited at shorter pulse periods, larger duty cycles, and higher average current densities. Moreover, compared with other pulse current waveforms, single-layer coatings electrodeposited at T = 10 ms, θ = 0.
View Article and Find Full Text PDFPolymers (Basel)
January 2025
Centre for Advanced Devices and Systems, Faculty of Engineering, Multimedia University, Persiaran Multimedia, Cyberjaya 63100, Selangor, Malaysia.
Electrochromic devices (ECDs) are devices that change their optical properties in response to a low applied voltage. These devices typically consist of an electrochromic layer, a transparent conducting substrate, and an electrolyte. The advancement in solid-state ECDs has been driven by the need for improved durability, optical performance, and energy efficiency.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!