Fluorinated carbon as high-performance cathode for aqueous zinc primary batteries.

RSC Adv

CAS Key Laboratory of Design and Assembly of Functional Nanostructures, Fujian Provincial Key Laboratory of Nanomaterials, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences Fuzhou 350002 China

Published: April 2024

Fluorinated carbon (CF) has been extensively served as promising positive electrode material for lithium primary batteries due to its high energy density. However, there are comparatively far less reports about the use of CF on other battery systems, let alone on the research of aqueous batteries. Herein in this study, we employed CF as the cathode active for aqueous zinc batteries for the first time and systematically investigated its electrochemical behavior under a series of aqueous zinc-ion electrolytes. As is discovered that the F/C ratio (the value in CF) of CF have significant effects on the electrochemical performance of aqueous Zn/CF batteries. Specifically, CF exhibits excellent electrochemical property with delivering a remarkable discharge capacity of 503 mA h g and energy density of 388 W h kg (at a current rate of 30 mA g under temperature of 25 °C), much better than several other CF electrode with F/C ratio of 0.70, 0.95, and 1.10, respectively. Besides, it also exhibits decent temperature performance with discharge capacities of 550 mA h g at 50 °C and 460 mA h g at 0 °C under current density of 30 mA g. Furthermore, the electrochemical discharge mechanism based on conversion reaction was further uncovered by applying XPS, XRD, SEM and EDS elemental analysis characterization techniques. In conclusion, these results demonstrate the potential application value of CF in aqueous zinc primary batteries.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11022125PMC
http://dx.doi.org/10.1039/d4ra00835aDOI Listing

Publication Analysis

Top Keywords

aqueous zinc
12
primary batteries
12
fluorinated carbon
8
zinc primary
8
energy density
8
f/c ratio
8
aqueous
6
batteries
6
carbon high-performance
4
high-performance cathode
4

Similar Publications

Metallic vanadium is innovatively introduced for a superior aqueous zinc-ion battery cathode material, which is activated through dissolution-deposition transition to amorphous VO·3HO and delivers an excellent capacity of 610 mA h g at 0.1 A g and remarkable capacity retention rate of 80.3% after 1000 cycles at 1 A g.

View Article and Find Full Text PDF

Tailoring Water-in-DMSO Electrolyte for Ultra-stable Rechargeable Zinc Batteries.

Angew Chem Int Ed Engl

January 2025

University of Shanghai for Science and Technology, Institute of Energy Material Science, Shanghai 200093, Shanghai, CHINA.

Rechargeable zinc batteries (RZBs) are hindered by two primary challenges: instability of Zn anode and deterioration of the cathode structure in traditional aqueous electrolytes, largely attributable to the decomposition of active H2O. Here, we design and synthesize a non-flammable water-in-dimethyl sulfoxide electrolyte to address these issues. X-ray absorption spectroscopy, in situ techniques and computational simulations demonstrate that the activity of H2O in this electrolyte is extremely compressed, which not only suppresses the side reactions and increases the reversibility of Zn anode, but also diminishes the cathode dissolution and proton intercalation.

View Article and Find Full Text PDF

Dual-mode luminescence and colorimetric sensing for Al and Fe/Fe ions in water using a zinc coordination polymer.

Spectrochim Acta A Mol Biomol Spectrosc

January 2025

Materials Chemistry Research Center, Department of Chemistry, Faculty of Science, Khon Kaen University, Khon Kaen 40002 Thailand. Electronic address:

A zinc(II) coordination polymer, [Zn(Hdhtp)(2,2'-bpy)(HO)] (1), has been utilized as a dual-mode luminescence-colorimetric sensor (Hdhtp = 2,5-dihydroxy terephthalate and 2,2'-bpy = 2,2'-bipyridine). The presence of hydroxyl groups in Hdhtp can promote excited-state intra- and intermolecular proton transfer (ESIPT) phenomena. Therefore, compound 1, which displays high stability in aqueous environments, exhibits a strong green-yellow photoluminescence.

View Article and Find Full Text PDF

The formation of non-ion conducting byproducts on zinc anode is notoriously detrimental to aqueous zinc-ion batteries (AZIBs). Herein, we successfully transform a representative detrimental byproduct, crystalline zinc hydroxide sulfate (ZHS) to fast-ion conducting solid-electrolyte interphase (SEI) via amorphization and fluorination induced by suspending CaF nanoparticles in dilute sulfate electrolytes. Distinct from widely reported nonhomogeneous organic-inorganic hybrid SEIs that exhibit structural and chemical instability, the designed single-phase SEI is homogeneous, mechanically robust, and chemically stable.

View Article and Find Full Text PDF

This paper describes the first use of conductive metal-organic frameworks as the active material in the electrochemical detection of nitric oxide in aqueous solution. Four hexahydroxytriphenylene (HHTP)-based MOFs linked with first-row transition metal nodes (M = Co, Ni, Cu, Zn) were compared as thin-film working electrodes for promoting oxidation of NO using voltammetric and amperometric techniques. Cu- and Ni-linked MOF analogs provided signal enhancement of 5- to 7-fold over a control glassy carbon electrode (SA = 6.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!