In vivo assessment of dual-function submicron textured nitric oxide releasing catheters in a 7-day rabbit model.

Acta Biomater

School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA 30602, United States; Department of Pharmaceutical and Biomedical Sciences, College of Pharmacy, University of Georgia, Athens, GA 30602, United States. Electronic address:

Published: May 2024

Catheter-induced thrombosis is a major contributor to infectious and mechanical complications of biomaterials that lead to device failure. Herein, a dualfunction submicron textured nitric oxide (NO)-releasing catheter was developed. The hemocompatibility and antithrombotic activity of vascular catheters were evaluated in both 20 h in vitro blood loop and 7 d in vivo rabbit model. Surface characterization assessments via atomic force microscopy show the durability of the submicron pattern after incorporation of NO donor S-nitroso-N-acetylpenicillamine (SNAP). The SNAP-doped catheters exhibited prolonged and controlled NO release mimicking the levels released by endothelium. Fabricated catheters showed cytocompatibility when evaluated against BJ human fibroblast cell lines. After 20h in vitro evaluation of catheters in a blood loop, textured-NO catheters exhibited a 13-times reduction in surface thrombus formation compared to the control catheters, which had 83% of the total area covered by clots. After the 7 d in vivo rabbit model, analysis on the catheter surface was examined via scanning electron microscopy, where significant reduction of platelet adhesion, fibrin mesh, and thrombi can be observed on the NO-releasing textured surfaces. Moreover, compared to relative controls, a 63% reduction in the degree of thrombus formation within the jugular vein was observed. Decreased levels of fibrotic tissue decomposition on the jugular vein and reduced platelet adhesion and thrombus formation on the texture of the NO-releasing catheter surface are indications of mitigated foreign body response. This study demonstrated a biocompatible and robust dual-functioning textured NO PU catheter in limiting fouling-induced complications for longer-term blood-contacting device applications. STATEMENT OF SIGNIFICANCE: Catheter-induced thrombosis is a major contributor to infectious and mechanical complications of biomaterials that lead to device failure. This study demonstrated a robust, biocompatible, dual-functioning textured nitric oxide (NO) polyurethane catheter in limiting fouling-induced complications for longer-term blood-contacting device applications. The fabricated catheters exhibited prolonged and controlled NO release that mimics endothelium levels. After the 7 d in vivo model, a significant reduction in platelet adhesion, fibrin mesh, and thrombi was observed on the NO-releasing textured catheters, along with decreased levels of fibrotic tissue decomposition on the jugular vein. Results illustrate that NO-textured catheter surface mitigates foreign body response.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11146291PMC
http://dx.doi.org/10.1016/j.actbio.2024.04.009DOI Listing

Publication Analysis

Top Keywords

textured nitric
12
nitric oxide
12
rabbit model
12
catheters exhibited
12
thrombus formation
12
catheter surface
12
platelet adhesion
12
jugular vein
12
catheters
9
submicron textured
8

Similar Publications

Assessment of surface treatment methods for strengthening the interfacial adhesion in CARALL fiber metal laminates.

Sci Rep

December 2024

Department of Mechanical and Industrial Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, 576104, Karnataka, India.

Metal and polymer interface bonding significantly influences the mechanical performance of fiber metal laminates (FMLs). Therefore, the effect of surface treatments (mechanical abrasion, nitric acid etching, P2 etching, sulfuric acid anodizing (SAA), and electric discharge machine (EDM) texturing) carried on aluminum 2024-T3 alloy sheets was evaluated considering surface morphology, surface topography, and surface roughness. Further, the influence of surface treatments on interfacial adhesion strength and failure mode between the aluminum alloy and carbon fiber prepreg was investigated.

View Article and Find Full Text PDF

Wound healing potential of mouth gel containing isopimarane diterpene from rhizomes for treatment of oral stomatitis.

PeerJ

December 2024

Department of Pharmacognosy and Pharmaceutical Botany, Faculty of Pharmaceutical Sciences, Prince of Songkla University, Hat Yai, Songkhla, Thailand.

Background: Oral ulcers have an impact on 25% of the global population including patients who are suffering from chemotherapy and radiotherapy treatments. L. has been traditionally used for treatment of mouth sores and tongue blisters.

View Article and Find Full Text PDF
Article Synopsis
  • Salicylic acid (SA) is effective for skincare, particularly for treating acne and uneven skin texture, and a new formulation combining it with oleoresin from Yang-Na (ODA) was tested for its benefits.
  • The niosome formulation F4 improved the encapsulation and stability of SA and showed a sustained release pattern when combined with ODA, enhancing the absorption of the acid.
  • F4 also demonstrated the ability to reduce inflammation markers, suggesting it could be developed into an effective topical treatment for inflammatory skin conditions in the future.
View Article and Find Full Text PDF

Enhanced adsorption of Pb by the oxygen-containing functional groups enriched activated carbon.

Environ Sci Pollut Res Int

May 2024

Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Energy and Power Engineering, Tsinghua University, Beijing, 100084, China.

Lead is one of the primary pollutants found in water and poses significant toxicity risks to humans; thus, it is necessary to investigate techniques for removing it economically and efficiently. In order to enhance the removal capacity of Pb, coconut shell-based activated carbon (AC) was modified with introducing oxygen-containing functional groups (OFGs) via nitric acid (HNO) or hydrogen peroxide (HO) modification in this study. The characterization results show that after oxidation treatment, the content of OFGs increased, and the textural properties of the samples do not change significantly.

View Article and Find Full Text PDF

To identify potential heavy minerals in the Mbiame floodplain in the Northwestern region of Cameroon, geochemical and petrographical data from alluvial deposits were utilized. The grains are mixed with inclusions of zircon and ilmenite, and the megacrysts come from felsic to intermediate igneous rocks like old basalt-andesite and magmatic gneiss. The Mbiame region lies between latitudes 6° 8' and 6° 24' N and longitudes 10° 39' and 10° 57' E, East of Mount Oku.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!