Movements after Captive Bolt Stunning in Cattle and Possible Animal- and Process-Related Impact Factors-A Field Study.

Movements in cattle after captive bolt stunning cause problems in the slaughter process and lead to uncertainties in assessing stunning effectiveness. The objective of this study was to categorize and quantify these movements and determine animal- and process-related impact factors, as well as connections to stunning effectiveness and shooting position. In total 2911 cows, heifers, and bulls (dairy, beef, and crossbreeds) were examined (mean age 3.02 years). Movements from landing until at least four minutes after sticking were recorded by action cams (Apeman A100). Nine movement categories were defined ("kicking hind limb", "twitching", "bending and stretching hind limb", "lifting and bending forelimb", "body arching laterally", "body arching ventrally", and "arching backwards"). According to the movement severity, a score was assigned to each category. The scores were summed, either for certain process intervals, e.g., LANDING (ejection from the stunning box), HOISTING, or STICKING, or for the total time between LANDING and end of the FOURTH MINUTE OF BLEEDING (sum score). Statistical analysis (ANOVA) was performed on the scores. Only 6.6% of cattle showed no movement. Most movements occurred during STICKING and FIRST MINUTE OF BLEEDING, occurring rarely up to 8 min after sticking. While cows moved most at LANDING, bulls and heifers moved more if all process intervals were considered. The sum score was highest in German Angus, Charolais, and Limousin and lowest in Brown Swiss and Simmental. The score at LANDING was highest in German Angus and Black Holstein. The use of pneumatic stunners and an increase in bolt-exit length significantly reduced movements. No impact of stunning effectiveness on movements was found, but only 19 cattle showed reduced effectiveness.