Mixed crushing and competitive leaching of all electrode material components and metal collector fluid in the spent lithium battery.

Hydrometallurgy is a primary method for recovering cathode electrode materials from spent lithium-ion batteries (LIBs). Most of the current research materials are pure cathode electrode materials obtained through manual disassembly. However, the spent LIBs are typically broken as a whole during the actual industrial recycling which makes the electrode materials combined with the collector fluid. Therefore, the competitive leaching between metal collector fluid and electrode material was examined. The pyrolysis characteristics of the electrode materials were analyzed to determine the pyrolysis temperature. The electrode sheet was pyrolyzed and then crushed for competitive leaching. The effect of pyrolysis was analyzed by XPS. The competitive leaching behavior was studied based on leaching agent concentration, leaching time and leaching temperature. The composition and morphology of the residue were determined to prove the competitive leaching results by XRD-SEM. TG results showed that 500 °C was the suitable pyrolysis temperature. XPS analysis demonstrated that pyrolysis can completely remove PVDF. Li and Co were preferentially leached during the competitive leaching while the leaching rates were 90.10% and 93.40% with 50 min leaching at 70 °C. The Al and Cu had weak competitive leachability and the leaching rate was 29.10% and 0.00%. XRD-SEM analysis showed that Li and Co can be fully leached with residual Al and Cu remaining. The results showed that the mixed leaching of electrode materials is feasible based on its excellent selective leaching properties.