The purpose of this research was to use polyvinyl alcohol (PVOH) 18-88 as a case study to evaluate the environmental fate, ecotoxicity, and overall safety profile of water-soluble, nonmodified PVOH polymers used in detergent films. An OECD 303A Wastewater Treatment Plant Simulation Study was conducted with dissolved organic carbon as the analytical endpoint to evaluate the removal of PVOH 18-88 during wastewater treatment. During the plateau phase, high levels of removal due to biodegradation were observed (average 97.4 ± 7.1, range: 88%-116%). The OECD 303A study quantitatively verified that surface water is the dominant receiving compartment for PVOH 18-88 post wastewater treatment. Acute algae, invertebrate, and fish embryo (fish embryo acute toxicity test [FET]) ecotoxicity studies quanitified the 50% lethal/effect concentration (L/EC50) for PVOH 18-88. Due to the potential for the chorion to impact PVOH 18-88 bioavailability, both chorionated and dechorionated FET tests were conducted. L/EC50 > 1000 mg/L for FET (chorionated and dechorionated), invertebrate, and algae were observed. The Sustainable Futures (US) and REACH (EU) frameworks were used to evaluate environmental risk. For the US assessment, the Exposure and Fate Assessment Screening Tool was used to predict the single day lowest flow over a 10-year period (1Q10) surface water concentration and the seven consecutive days of lowest flow over a 10-year period (7Q10) surface water concentration and compared with acute and chronic concentrations of concern. For the EU assessment, the European Union System for the Evaluation of Substances was used to predict local and regional exposure concentrations and compared to the predicted no effect concentration. For both regulatory assessments, the exposure concentrations were >2 orders of magnitude below the effect concentrations. Integr Environ Assess Manag 2024;20:1693-1705. © 2024 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Download full-text PDF

Source
http://dx.doi.org/10.1002/ieam.4929DOI Listing

Publication Analysis

Top Keywords

pvoh 18-88
20
evaluate environmental
12
wastewater treatment
12
surface water
12
polyvinyl alcohol
8
oecd 303a
8
fish embryo
8
chorionated dechorionated
8
lowest flow
8
flow 10-year
8

Similar Publications

Evaluation of Polyvinyl Alcohol as Binder during Continuous Twin Screw Wet Granulation.

Pharmaceutics

June 2024

Laboratory of Pharmaceutical Technology, Department of Pharmaceutics, Ghent University, Ottergemsesteenweg 460, 9000 Ghent, Belgium.

Binder selection is a crucial step in continuous twin-screw wet granulation (TSWG), as the material experiences a much shorter residence time (2-40 s) in the granulator barrel compared to batch-wise granulation processes. Polyvinyl alcohol (PVA) 4-88 was identified as an effective binder during TSWG, but the potential of other PVA grades-differing in polymerization and hydrolysis degree-has not yet been studied. Therefore, the aim of the current study was to evaluate the potential of different PVA grades as a binder during TSWG.

View Article and Find Full Text PDF

The purpose of this research was to use polyvinyl alcohol (PVOH) 18-88 as a case study to evaluate the environmental fate, ecotoxicity, and overall safety profile of water-soluble, nonmodified PVOH polymers used in detergent films. An OECD 303A Wastewater Treatment Plant Simulation Study was conducted with dissolved organic carbon as the analytical endpoint to evaluate the removal of PVOH 18-88 during wastewater treatment. During the plateau phase, high levels of removal due to biodegradation were observed (average 97.

View Article and Find Full Text PDF

This research evaluated the intra- and interlaboratory variability when applying OECD 301F and OECD 301B Ready Biodegradation respirometric test methods to quantify polymer biodegradation as well as the impact of method modifications including test duration, inoculum level and test substance concentration on results. This assessment synthesizes results of mineralization studies on 5 polymers of varying structural components, molecular weight, charge, and solubility, evaluated at 8 different laboratories in 4 different countries, providing significant geographic variation in inoculum source as well as lab to lab variations in test setup. Across all laboratories, intralaboratory variability was low (≤18 % absolute difference) indicating the reproducibility of results between replicates and uniformity of test setup in each laboratory.

View Article and Find Full Text PDF

To design and evaluate hyaluronan-based cubosomes loaded with bromfenac sodium (BS) for ocular application to enhance the corneal permeation and retention in pterygium and cataract treatment. BS-loaded cubosomes were prepared by the emulsification method, employing 2 full factorial design using Design-Expert® software. Glycerol monoolein (GMO) and poloxamer 407 (P407) as lipid phase and polyvinyl alcohol (PVA) as stabilizer were the used ingredients.

View Article and Find Full Text PDF

Quetiapine fumarate (QF), an anti-schizophrenic drug, suffers from rapid elimination and poor bioavailability due to extensive first-pass effect. Intramuscularly (IM) injected lipospheres were designed to enhance the drug's bioavailability and extend its release. A central composite design was applied to optimize the liposphere preparation by a melt dispersion technique using Compritol® 888 ATO or glyceryl tristearate as lipid component and polyvinyl alcohol as surfactant.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!