AI Article Synopsis
Article Abstract
Chemical foaming technology is widely used in the preparation of silicone rubber foam and is attributable to its one-step molding capability and eco-friendly production processes. The microrheological properties of silicone rubber play a pivotal role during the foaming process. In this study, Rheolaser Lab (Formulaction, Toulouse, France) was used to conduct in situ examinations for the influence of a crosslinking agent on the microrheological properties of silicone rubber foam for the first time. This study monitors the entire reaction process of silicone rubber foam from liquid to solid, as well as the matching of crosslinking and foaming reactions. Various parameters, including solid-liquid balance, elasticity index, and macroscopic viscosity index, are measured to analyze the microrheological properties of silicone rubber foam. The results show that the silicone rubber foam exhibits good microrheological properties, thereby demonstrating excellent performance at a crosslinking agent content of 2%. Through adjusting the experimental conditions, a sustainable and efficient approach was proposed for better cellular structure control in the industrial preparation of silicone rubber foam.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10856475 | PMC |
| http://dx.doi.org/10.3390/ma17030707 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Surface Fluorination of Silicone Rubber with Enhanced Stain Resistance and Slip Properties.
ACS Appl Mater Interfaces
January 2025
State Key Laboratory of Polymer Materials Engineering, College of Polymer Science and Engineering, Sichuan University, Chengdu, Sichuan 610065, P.R. China.
Silicone rubber (SR) holds significant potential for everyday wearable devices due to its inherent sweat resistance and flexibility. However, its broader applicability is constrained by poor oil resistance and a suboptimal slip performance. In this study, we developed an SR with durable oil resistance and enhanced slip properties by forming a covalently bonded barrier layer on its surface through a one-step in situ fluorination reaction using F/N.
View Article and Find Full Text PDFEffect of Plasma Treatment on Coating Adhesion and Tensile Strength in Uncoated and Coated Rubber Under Aging.
Materials (Basel)
January 2025
Mechanical Engineering Department, Universidad Carlos III de Madrid, 28911 Leganés, Spain.
The degradation of rubber materials under environmental and mechanical stress presents a significant challenge, particularly due to UV (ultraviolet light) exposure, which severely impacts the material's physical properties. This study aims to enhance the UV stability and longevity of rubber by evaluating the performance of modified polyurethane and silicone coatings as protective stabilizers. Natural rubber-styrene-butadiene rubber (NR-SBR), known for its exceptional mechanical properties, was selected as the base material.
View Article and Find Full Text PDFInchworm Robots Utilizing Friction Changes in Magnetorheological Elastomer Footpads Under Magnetic Field Influence.
Micromachines (Basel)
December 2024
Department of Mechanical Engineering, Inha University, Incheon 22212, Republic of Korea.
The application of smart materials in robots has attracted considerable research attention. This study developed an inchworm robot that integrates smart materials and a bionic design, using the unique properties of magnetorheological elastomers (MREs) to improve the performance of robots in complex environments, as well as their adaptability and movement efficiency. This research stems from solving the problem of the insufficient adaptability of traditional bionic robots on different surfaces.
View Article and Find Full Text PDF3D-Printing of Artificial Aortic Heart Valve Using UV-Cured Silicone: Design and Performance Analysis.
Bioengineering (Basel)
January 2025
Department of Mechanical Engineering, Texas Tech University, Lubbock, TX 79409, USA.
The advancement of medical 3D printing technology includes several enhancements, such as decreasing the length of surgical procedures and minimizing anesthesia exposure, improving preoperative planning, creating personalized replicas of tissues and bones specific to individual patients, bioprinting, and providing alternatives to human organ transplants. The range of materials accessible for 3D printing within the healthcare industry is significantly narrower when compared with conventional manufacturing techniques. Liquid silicone rubber (LSR) is characterized by its remarkable stability, outstanding biocompatibility, and significant flexibility, thus presenting substantial opportunities for manufacturers of medical devices who are engaged in 3D printing.
View Article and Find Full Text PDFPig tongue soft robot mimicking intrinsic tongue muscle structure.
Front Robot AI
January 2025
School of Engineering, Institute of Science Tokyo, Tokyo, Japan.
Animal muscles have complex, three-dimensional structures with fibers oriented in various directions. The tongue, in particular, features a highly intricate muscular system composed of four intrinsic muscles and several types of extrinsic muscles, enabling flexible and diverse movements essential for feeding, swallowing, and speech production. Replicating these structures could lead to the development of multifunctional manipulators and advanced platforms for studying muscle-motion relationships.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!