The aim of this study was to establish the impact of air transport on blood samples packaged with and without cooling elements and effect of outdoor temperature on sample quality. Venous samples from 38 blood donors in winter and 36 in summer were tested for hemolysis and complete blood count. One tube subject was kept in controlled conditions at +4 °C. Two sets of tubes were sent by plane from Zagreb to Brussels, one with and one without cooling elements, and another two sets were sent to London following the same principle. Packages with cooling elements were stored in controlled warehousing conditions at airports (+2 °C to +8 °C), whereas packages without cooling elements were stored in ambient warehouse conditions. Data loggers were used for temperature monitoring. Our research revealed statistically significant differences in several hematologic parameters when comparing the samples stored in controlled laboratory conditions and those transported by plane. These differences were more pronounced in the samples transported during the summer. Transport conditions without cooling elements had additional negative impact on the sample quality. Transport of samples using cooling elements and controlled warehousing conditions at airports are sometimes not sufficient to maintain laboratory storage conditions.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10969646 | PMC |
| http://dx.doi.org/10.20471/acc.2023.62.02.13 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Free convection investigation for a Casson-based - nanofluid in semi parabolic enclosure with corrugated cylinder.
Heliyon
January 2025
Biomedical Engineering Department, College of Engineering and Technologies, Al-Mustaqbal University, Hillah, Iraq.
The optimization of heat transfer in various engineering applications, such as thermal management systems and energy storage devices, remains a crucial challenge. This study aims to investigate the potential of Casson-based Cu-HO nanofluids in enhancing free convection heat transfer within complex geometries. The research examines the free convection heat transfer and fluid flow characteristics of a Casson-based Cu-HO nanofluid within a semi-parabolic enclosure that includes a wavy corrugated cylinder.
View Article and Find Full Text PDFRefluxing Mature Compost to Replace Bulking Agents: A Low-Cost Solution for Suppressing Antibiotic Resistance Genes Rebound in Sewage Sludge Composting.
Environ Res
January 2025
State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090, China. Electronic address:
Antibiotic resistance genes (ARGs) rebounding during composting cooling phase is a critical bottleneck in composting technology that increased ARGs dissemination and application risk of compost products. In this study, mature compost (MR) was used as a substitute for rice husk (RH) to mitigate the rebound of ARGs and mobile genetic elements (MGEs) during the cooling phase of sewage sludge composting, and the relationship among ARGs, MGEs, bacterial community and environmental factors was investigated to explore the key factor influencing ARGs rebound. The results showed that aadD, blaCTX-M02, ermF, ermB, tetX and vanHB significantly increased 4.
View Article and Find Full Text PDFDevelopment of a Stable Process for Wire Embedding in Fused Filament Fabrication Printing Using a Geometric Correction Model.
Materials (Basel)
December 2024
Fraunhofer Institute for Machine Tools and Forming Technology IWU, Nöthnitzer Straße 44, 01187 Dresden, Germany.
Using a newly developed tool head with an additional rotational axis and a wire feed, wires can be directly processed in the fused filament fabrication (FFF) process. Thus, electrical structures such as conductive paths, coils, heating elements, or sensors can be integrated into polymer parts. However, the accuracy of the wire deposition in curved sections of the print track is insufficient.
View Article and Find Full Text PDFQuadruple-band synglisis enables high thermoelectric efficiency in earth-abundant tin sulfide crystals.
Science
January 2025
Center for Bioinspired Science and Technology, Hangzhou International Innovation Institute, Beihang University, Hangzhou, China.
Thermoelectrics have been limited by the scarcity of their constituent elements, especially telluride. The earth-abundant, wide-bandgap ( ≈ 46 ) tin sulfide (SnS) has shown promising performance in its crystal form. We improved the thermoelectric efficiency in SnS crystals by promoting the convergence of energy and momentum of four valance bands, termed quadruple-band synglisis.
View Article and Find Full Text PDFPhase transformation and metallurgical characterization of heat-treated nickel-titanium rotary instruments using differential scanning calorimetry, X-ray diffraction, and energy dispersive spectrometry.
J Conserv Dent Endod
November 2024
Department of Metallurgical and Materials Engineering, National Institute of Technology, Srinagar, Jammu and Kashmir, India.
Objective: The present study aimed to evaluate the phase transformation behavior and elemental analysis of thermomechanical-treated nickel-titanium (NiTi) rotary instruments, TruNatomy (Dentsply Sirona), HyFlex CM (coltene, Whaledent), and Neoendo Flex (Orikam healthcare India), using differential scanning calorimetry (DSC), X-ray diffraction (XRD), and energy dispersive X-ray spectrometry.
Materials And Methods: A total of 18 NiTi rotary instruments, TruNatomy, Hyflex CM, Neoendo Flex, taper. 04, size 25 (except TruNatomy, size 26) were selected and were divided into three groups ( = 6).
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!