Background: This study compared the influence of crystallization on marginal gap adaptation by using computer-aided design and manufacturing (CAD-CAM) for producing monolithic zirconia-reinforced lithium silicate (ZLS) ceramic crowns.
Methods: A total of 25 plastic teeth were scanned using a Primescan intra-oral scanner (IOS), and ZLS crowns were ground. For each unit (abutment and crown), the marginal gap was evaluated pre crystallization and post crystallization at four regions of interest through the use of a scanning electron microscope (SEM). To compare the marginal gap between the two groups, a Kolmogorov-Smirnov test performed on the study variables indicated a normal distribution ( > 0.05) followed by paired samples T-tests (α = 0.0005).
Results: After crystallization, there were significantly higher circumferential marginal gaps (CMGs) for all four surfaces (distal ( = 0.0005), mesial ( = 0.0005), palatal ( = 0.0005), and buccal ( = 0.0005)). The total mean marginal gap (MMG) revealed a significantly higher result for the post-crystallization group (79.82 ± 7.86 μm) compared to the pre-crystallization group (24.25 ± 5.49 μm).
Conclusions: The post-crystallization group showed a significantly higher marginal gap compared to the pre-crystallization group in all parameters, but both groups were in the clinically accepted threshold (<120 microns). In terms of the marginal gap, it is arguable whether to carry out post-crystallization for CELTRA DUO crowns and achieve better mechanical properties but significantly increase the marginal gap.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10969533 | PMC |
| http://dx.doi.org/10.3390/dj12030061 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Complete transition from laparoscopic to robotic liver surgery achieves superior outcomes in difficult hepatectomies: a seven-year retrospective study.
Surg Endosc
January 2025
Department of Surgery, Weill Cornell Medicine, New York, NY, USA.
Background: Minimally invasive liver surgery (MILS) is superior to open surgery when considering decreased blood loss, fewer complications, shorter hospital stay, and similar or improved oncologic outcomes. However, operative limitations in laparoscopic hepatectomy have curved its applicability and momentum of complex minimally invasive liver surgery. Transitioning to robotic hepatectomy may bridge this complexity gap.
View Article and Find Full Text PDFFracture resistance and marginal fit of three different overlay designs using advanced zirconia-reinforced lithium disilicate CAD/CAM material.
BMC Oral Health
January 2025
Department of Conservative Dentistry, Faculty of Dentistry, Alexandria University, Alexandria, Egypt.
Background: Conservative dentistry introduced modern restoration designs, contributing to the greater use of partial-coverage ceramic restorations. New strong bondable ceramic materials made fabricating partial coverage ceramic restorations easier to restore the badly destructed teeth.
Aim Of The Study: This study investigated the impact of three distinct overlay preparation designs on the marginal fit (both before and after thermal aging) and the fracture resistance of overlay restorations fabricated using advanced zirconia-reinforced lithium disilicate (ALD) CAD/CAM glass-ceramic blocks.
Evaluation of marginal accuracy of polyetheretherketone and zirconia copings fabricated using computer-aided design/computer-aided manufacturing technique: An in vitro study.
J Indian Prosthodont Soc
January 2025
Department of Prosthodontics, Chhattisgarh Dental College and Hospital, Rajnandgaon, Chhattishgarh, India.
Aim: The aim of this study was to compare the marginal accuracy of polyetheretherketone (PEEK) and zirconia copings fabricated using computer-aided design/computer-aided manufacturing (CAD/CAM) technology, and to assess the impact of their material properties on accuracy when produced with a 4-axis milling system under controlled conditions.
Settings And Design: The study employed an in vitro design with a stainless steel die model featuring a 6 mm axial wall height, a 6-degree total occlusal convergence, and a radial shoulder finish line.
Materials And Methods: Thirty stone dies were created from silicone impressions of the metal die and poured using type-IV dental stone.
Comparative evaluation of marginal fit accuracy of two different designs of endocrown manufactured through CAD-CAM system: An in vitro study.
J Indian Prosthodont Soc
January 2025
Department of Epidemiology, College of Medicine, University of Cincinnati, Ohio, USA.
Aims: To compare the accuracy of marginal fit of CAD-CAM endocrown with two different preparation forms, i.e., endocrown with ferrule and endocrown without ferrule.
View Article and Find Full Text PDFA sensitive molecular probe exhibiting significant change in their photophysical and morphological behavior upon interaction with Fe ion.
Spectrochim Acta A Mol Biomol Spectrosc
December 2024
Department of Chemistry, Institute of Science, Banaras Hindu University, Varanasi 221005, UP, India. Electronic address:
An efficient molecular probe 8 has been designed and synthesized. The photophysical, electrochemical and morphological behavior of the probe has been examined in the absence and presence of different ions. The probe 8 at 90 % water fraction in acetonitrile showed aggregation induced emission (AIE).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!