The increasing aging of the population has elevated bone defects to a significant threat to human life and health. Aerogel, a biomimetic material similar to an extracellular matrix (ECM), is considered an effective material for the treatment of bone defects. However, most aerogel scaffolds suffer from immune rejection and poor anti-inflammatory properties and are not well suited for human bone growth. In this study, we used electrospinning to prepare flexible ZnO-SiO nanofibers with different zinc concentrations and further assembled them into three-dimensional composite aerogel scaffolds. The prepared scaffolds exhibited an ordered pore structure, and chitosan (CS) was utilized as a cross-linking agent with aspirin (ASA). Interestingly, the 1%ZnO-SiO/CS@ASA scaffolds not only exhibited good biocompatibility, bioactivity, anti-inflammation, and better mechanical properties but also significantly promoted vascularization and osteoblast differentiation . In the mouse cranial defect model, the BV/TV data showed a higher osteogenesis rate in the 1%ZnO-SiO/CS group (10.94 ± 0.68%) and the 1%ZnO-SiO/CS@ASA group (22.76 ± 1.83%), compared with the control group (5.59 ± 2.08%), and studies confirmed the ability of 1%ZnO-SiO/CS@ASA to promote in situ regeneration of new bone. This may be attributed to the fact that Si, Zn, and ASA released from 1%ZnO-SiO/CS@ASA scaffolds can promote angiogenesis and bone formation by stimulating the interaction between endothelial cells (ECs) and BMSCs, as well as inducing macrophage differentiation to the M2 type and downregulating the expression of pro-inflammatory factor (TNF-α) to modulate local inflammatory response. These exciting results and evidence suggest that it provides a new and effective strategy for the treatment of bone defects.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.3c17152 | DOI Listing |
ACS Sens
November 2024
State Key Laboratory of Integrated Optoelectronics, Key Laboratory of Gas Sensors, Jilin Province, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012, China.
Sulfur dioxide (SO) is a common environmental pollutant with significant hazards. However, sensors for SO real-time monitoring at room temperature often face problems such as a poor response and sluggish recovery. In this work, a fuel cell-type gas sensor based on nitrogen-doped carbon nanotube (CNT) aerogels loaded with Cu particle electrode material and COF/Nafion composite electrolyte was developed, which exhibited excellent SO sensitivity and fast response/recovery.
View Article and Find Full Text PDFAdv Mater
November 2024
Polymer Performance Materials Group, Department of Chemical Engineering and Chemistry and Institute for Complex Molecular Systems (ICMS), Eindhoven University of Technology, Eindhoven, 5600 MB, The Netherlands.
Organic aerogels are an advanced class of materials renowned for their ultralow thermal conductivity and highly porous architecture, making them ideal for applications in thermal insulation, catalysis, and chemical absorption. However, these polymeric networks pose environmental concerns as their permanently crosslinked scaffold makes recycling back to the original monomers virtually impossible. To tackle this issue and develop next-generation organic aerogel, a set of polyhexahydrotriazine (PHT) aerogels specifically designed for closed-loop chemical recycling are prepared.
View Article and Find Full Text PDFGels
September 2024
Institut de Ciència de Materials de Barcelona (ICMAB), Consejo Superior de Investigaciones Científicas (CSIC), Campus UAB s/n, 08193 Bellaterra, Spain.
The development of new biomaterials for musculoskeletal tissue repair is currently an important branch in biomedicine research. The approach presented here is centered around the development of a prototypic synthetic glycerogel scaffold for bone regeneration, which simultaneously features therapeutic activity. The main novelty of this work lies in the combination of an open meso and macroporous nanocrystalline cellulose (NCC)-based glycerogel with a fully biocompatible microporous bioMOF system (CaSyr-1) composed of calcium ions and syringic acid.
View Article and Find Full Text PDFACS Appl Mater Interfaces
October 2024
Microcellular Plastics Manufacturing Laboratory, Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, Ontario, Canada, M5S 3G8.
This study addresses the inherent fragility and fractal limitations of traditional silica aerogels by developing a bio-templated aerogel fiber. Integrating cellulose nanofibers (CNFs), thermoplastic polyurethane (TPU), and silica aerogel (SA) in a dimethyl sulfoxide (DMSO) dispersion, a gel-spinning technique was employed to create aerogel fibers with superior thermomechanical performance. CNF also provided excellent rheological modification for successful spinnability, fast gelation, and fiber formation.
View Article and Find Full Text PDFACS Appl Bio Mater
December 2024
Department of Chemistry, Institute of Inorganic Chemistry, University of Cologne, Greinstrasse 6, 50939 Cologne, Germany.
The aim of this study is to design a therapeutic enhanced three-dimensional (3D) silk fibroin (SF)-based scaffold containing propolis (Ps)-loaded chitosan (CH) nanocarriers. To this aim, we initially synthesized a hybrid gel-based ink by a synergistic sol-gel and self-assembly approach and then processed the resulting gels by microextrusion-based 3D printing followed by supercritical drying to obtain 3D hybrid aerogel scaffolds. Ps was utilized to enhance the final scaffold's bactericidal efficacy and cell responsiveness.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!