AI Article Synopsis
- The study investigates the thermal stability of four types of 18,650 lithium-ion batteries with different cathode materials (LiCoO, LiFePO, LiNiCoMnO, LiNiCoAlO) using specialized calorimeters.
- The ranking of thermal runaway risk shows that LiCoO poses the highest danger, followed by LiNiCoAlO, LiNiCoMnO, and LiFePO, with higher levels of nickel and cobalt associated with increased capacity but lower thermal stability.
- The findings have significant implications for improving the safety and design of commercial lithium-ion batteries by understanding how different materials affect performance under varying conditions.
Article Abstract
In this work, the thermal stability of four types of 18,650 lithium-ion batteries with LiCoO (LCO), LiFePO (LFP), LiNiCoMnO (NCM811) and LiNiCoAlO (NCA) materials as cathodes are experimentally investigated by the accelerating rate calorimeter (ARC) and the isothermal battery testing calorimeter (iso-BTC) under adiabatic and isothermal conditions, respectively. The thermal runaway danger level of these batteries can be ranked as LCO > NCA > NCM811 >> LFP by judging from the values of T and HR. The higher the nickel and cobalt content, the higher the lithium-ion battery capacity, but the worse the thermal stability. The Q of NCA is the largest in the complete standard charge and discharge process, due to that the capacity of NCA is significantly higher than that of the other three batteries, resulting in remarkable increase in Q proportioned to the square of the current. When the ambient temperature rises, the energy release decreases owing to the decrease in the internal resistance of the battery. These studies are expected to have important implications for the subsequent safe design of commercial lithium-ion batteries with different cathode materials.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10963544 | PMC |
| http://dx.doi.org/10.3389/fchem.2024.1324840 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
P2-NaMnNiCoO stabilized by optimal active facets for sodium-ion batteries.
J Colloid Interface Sci
January 2025
MOE Key Laboratory for UV Light-Emitting Materials and Technology, Department of Physics, Northeast Normal University, Changchun, Jilin 130024, PR China; Faculty of Chemistry, Northeast Normal University, Changchun, Jilin 130024, PR China. Electronic address:
Considering factors such as crustal reserves, atomic mass, redox potential and energy density, sodium-ion batteries (SIBs) are regarded as the most promising alternative to lithium-ion batteries (LIBs). Transition metal-based layered oxides, especially typical NaMnO, stand out among cathode materials due to their low cost and high energy density. However, NaMnO cathodes face several challenges, including Jahn-Teller distortion, manganese dissolution, structural collapse, irreversible phase transition and significant capacity loss.
View Article and Find Full Text PDFResolving electrochemically triggered topological defect dynamics and structural degradation in layered oxides.
Proc Natl Acad Sci U S A
January 2025
Department of Physics and Astronomy, University of California, Irvine, CA 92697.
Understanding topological defects-controlled structural degradation of layered oxides-a key cathode material for high-performance lithium-ion batteries-plays a critical role in developing next-generation cathode materials. Here, by constructing a nanobattery in an electron microscope enabling atomic-scale monitoring of electrochemcial reactions, we captured the electrochemically driven atomistic dynamics and evolution of dislocations-a most important topological defect in material. We deciphered how dislocations nucleate, move, and annihilate within layered cathodes at the atomic scale.
View Article and Find Full Text PDFA room temperature rechargeable Li-LiNO battery with high capacity.
Proc Natl Acad Sci U S A
January 2025
Beijing Key Laboratory of Environmental Science and Engineering, School of Materials Science & Engineering, Beijing Institute of Technology, Beijing 100081, China.
Lithium-ion batteries (LIBs) have become advanced energy storage technologies; however, specific capacity remains limited by the active materials in cathodes. Here, we report Li-LiNO batteries (LNBs) where LiNO in electrolyte serves as both active materials and ion conductor at room temperature. LNBs operate on a highly reversible redox between NO and NO, which results in an impressive areal capacity of 19 mAh cm at a plateau voltage of 1.
View Article and Find Full Text PDFNano-confined Si@C composites with excellent lithium-ion storage performance derived from a POSS-based covalent framework and low-temperature reduction method.
Dalton Trans
January 2025
State Key Laboratory of Coordination Chemistry, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, 210023, China.
Silicon-based anode materials experience significant volume changes and low conductivity during the lithiation process, which severely hinders their successful application in lithium-ion batteries. Reducing the size of silicon particles and effectively combining them with carbon-based materials are considered the main strategies to enhance the lithium-ion storage performance of silicon-based anodes. In this study, we employed a "bottom-up" strategy to synthesize Si@C anode materials by cross-linking octa-aminopropyl polyhedral oligomeric silsesquioxane (NH-POSS) with terephthalaldehyde and subsequent high-temperature treatment and low-temperature liquid reduction.
View Article and Find Full Text PDFNaphthalene Diimide and Pyromellitic Diimide Networks as Cathode Materials in Lithium-ion Batteries: on the Instability of Pyromellitic Diimide.
Macromol Rapid Commun
January 2025
Institut für Chemie, Technische Universität Chemnitz, Straße der Nationen 62, 09111, Chemnitz, Germany.
Aromatic diimides such as naphthalene diimide (NDI) and pyromellitic diimide (MDI) are important building blocks for organic electrode materials. They feature a two-electron redox mechanism that allows for energy storage. Due to the smaller size of MDI compared to NDI its theoretical capacity is higher.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!