Objective: . Aim: To study the stability of surface-modified dental implants, with the usage of sandblasting/acid modification vs. photoactivation.
Patients And Methods: Materials and Methods: In the observation were included 164 patients with dental defects. All patients had digital impressions taken by scanning the oral cavity with an intraoral scanner 3Shape TRIOSR. Group A (80 subjects) included implants whose surface was modified with a combination of sandblasting and acid. Group B (84 subjects) - implants after modification with photoactivation. The implant stability quotient was recorded using an Osstell MentorTM device.
Results: Results: The reliable effectiveness of the photoactivation method in complex treatment of the surface of dental implants in improving the stability of fixed dentures in the short and long-term periods of observation was proven. When assessing immediate clinical outcomes, there was no significant difference in the frequency of hyperemia, algesia, hyperthermia, soft tissue edema, regional lymphadenitis, depending on the classical method of treating the implant surface and the complex method with photoactivation. Of the long-term clinical outcomes with classical surface treatment, the absolute risk of implant failure was 1.2%, relative risk - 0,99 [CI%0,96-1,0]. The average value of the implant stability coefficient (ISQ) and the data of the Periotest study at the time of surgery probably did not differ in the observation groups, after 3 months, a higher index was proven in the treatment of the surface by the method of photoactivation and greater stability of the mandibular implants. At the time of implantation, there were no statistically significant differences in implant fixation between the groups, however, during prospective observation in group A, secondary stability indicators based on periotestometry results were significantly lower.
Conclusion: Conclusions: It was proved the reliable effectiveness of the photoactivation-method for surface modification in the short and long-term periods of observation for improving the results of orthodontically treatment.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.36740/Merkur202401107 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Surface-modified carbon quantum dot for enhanced fluorescent-sensing of hexagonal valent chromium.
Anal Sci
January 2025
MOE Key Laboratory of Resources and Environmental System Optimization, College of Environmental Science and Engineering, North China Electric Power University, Beijing, 102206, People's Republic of China.
As one of the most harmful heavy metal pollutants, hexavalent chromium Cr(VI) is becoming a serious threat to human health. Thus pursuing a remarkably sensitive method to monitor the Cr(VI) concentration in natural conditions is favored for the fast response to prevent harm. In the present work, an ethylenediamine (En) and SiO-modified wool keratin-based carbon quantum dot (CQD)(En@CQDs@SiO) fluorescent sensor is prepared, and the En is found to improve the discrimination ability by binding the Cr(VI) with the surface carboxyl groups.
View Article and Find Full Text PDFHighly salt-resistant and efficient dynamic Janus absorber based on thermo-responsive hydroxypropyl cellulose.
Mater Horiz
January 2025
School of Materials Science and Engineering, National Institute for Advanced Materials, Nankai University, Tianjin 300350, China.
Recent advances in interfacial solar steam generation have made direct solar desalination a promising approach for providing cost-effective and environmentally friendly clean water solutions. However, developing highly effective, salt-resistant solar absorbers for long-term desalination at high efficiencies and evaporation rates remains a significant challenge. We present a Janus hydrogel-based absorber featuring a surface modified with thermo-responsive hydroxypropyl cellulose (HPC) and a hydrogel matrix containing photothermal conversion units, MXene, specifically designed for long-term seawater desalination.
View Article and Find Full Text PDFEnhancing Quasi-Solid-State Lithium-Metal Battery Performance: Multi-Interlayer, Melt-Infused Lithium and Lithiophilic Coating Strategies for Interfacial Stability in Li||VS-DSGNS-LATP|PEO-PVDF||NMC622-AlO Systems.
ACS Appl Mater Interfaces
January 2025
Advanced Functional Nanomaterials Research Laboratory, Centre for Nanoscience and Technology, Madanjeet School of Green Energy Technologies, Pondicherry University (A Central University), Dr. R. Venkataraman Nagar, Kalapet, Puducherry 605014, India.
The development of quasi-solid-state lithium metal batteries (QSSLMBs) is hindered by inadequate interfacial contact, poor wettability between electrodes and quasi-solid-state electrolytes, and significant volume changes during long-term cycling, leading to safety risks and cataclysmic failures. Here, we report an innovative approach to enhance interfacial properties through the construction of QSSLMBs. A multilayer design integrates a microwave-synthesized LiAlTi(PO) (LATP) ceramic electrolyte, which is surface-coated with a lithiophilic conductive ink comprising VS and disulfonated functionalized graphene nanosheets (VS-DSGNS) using a low-cost nail-polish binder.
View Article and Find Full Text PDFShape and Size Dependent Antimicrobial and Anti-biofilm Properties of Functionalized MoS.
ACS Infect Dis
January 2025
Department of Organic Chemistry, Indian Institute of Science, Bangalore 560012, India.
Bacterial resistance, accelerated by the misuse of antibiotics, remains a critical concern for public health, promoting an ongoing exploration for cost-effective and safe antibacterial agents. Recently, there has been significant focus on various nanomaterials for the development of alternative antibiotics. Among these, molybdenum disulfide (MoS) has gained attention due to its unique chemical, physical, and electronic properties, as well as its semiconducting nature, biocompatibility, and colloidal stability, positioning it as a promising candidate for biomedical research.
View Article and Find Full Text PDFComparative Analysis of Solvent Casting and Pickering Emulsion Techniques for Improving the Mechanical Properties of Surface-Modified Cellulose Nanomaterial-Reinforced Polylactic Acid Composites.
Polymers (Basel)
December 2024
Advanced Polymer Materials Group, National University of Science and Technology Politehnica Bucharest, 1-7 Gh. Polizu Street, 011061 Bucharest, Romania.
In the present work, solvent casting and Pickering emulsion methods are studied to enhance the mechanical properties of polylactic acid (PLA) composites containing surface-modified cellulose nanomaterials. To enhance the compatibility and the adhesion at the interface, cellulose nanocrystal (CNC) was functionalized by 2,4-methylene diphenyl diisocyanate (MDI) and castor oil. Their results demonstrated that the Pickering emulsion method led to better dispersion of CNC in composites, resulting in improved tensile strength, flexibility, and thermal stability (compared with solvent-casted ones).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!