To minimize errors in calculating coal flue gas adsorption capacity due to gas compressibility and to preclude prediction inaccuracies in abandoned mine flue gas storage capacity for power plants, it is imperative to account for the influence of compression factor calculation accuracy while selecting the optimal theoretical adsorption model. In this paper, the flue gas adsorption experiment of a power plant with coal samples gradually pressurized to close to 5 MPa at two different temperatures is carried out, and the temperature and pressure data obtained from the experiment are substituted into five different compression factor calculation methods to calculate different absolute adsorption amounts. The calculated adsorption capacities were fitted into six theoretical adsorption models to establish a predictive model suitable for estimating the coal adsorption capacity in power plant flue gas. Results reveal significant disparities in the absolute adsorption capacity determined by different compression factors, with an error range of 0.001278-7.8262 (cm/kg). The Redlich-Kwong equation of state emerged as the most suitable for the flue gas of the selected experimental coal sample and the chosen composition ratio among the five compression factors. Among the six theoretical adsorption models, the Brunauer-Emmett-Teller model with three parameters demonstrated the highest suitability for predicting the adsorption capacity of coal samples in power plant smoke, achieving a fitting accuracy as high as 0.9922 at 49.7 °C.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10938422 | PMC |
| http://dx.doi.org/10.1021/acsomega.3c10005 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Manipulation of ion/electron carrier genes in the model diatom enables its growth under lethal acidic stress.
iScience
August 2024
Ocean College, Zhejiang University, Zhoushan, Zhejiang 316021, China.
A major obstacle to exploiting industrial flue gas for microalgae cultivation is the unfavorable acidic environment. We previously identified three upregulated genes in the low-pH-adapted model diatom : ferredoxin (PtFDX), cation/proton antiporter (PtCPA), and HCO transporter (PtSCL4-2). Here, we individually overexpressed these genes in to investigate their respective roles in resisting acidic stress (pH 5.
View Article and Find Full Text PDFSecondary-ion-promoted active site redistribution in molecular sieves: A strategy to enhance catalyst bifunctionality.
J Colloid Interface Sci
December 2024
Key Laboratory of Groundwater Resources and Environment (Jilin University), Ministry of Education, College of New Energy and Environment, Jilin University, Changchun 130021, China. Electronic address:
As the frontier of environmental catalysis, mercury removal by deNO unit over bifunctional catalyst has emerged. However, it is fundamentally challenging to achieve simultaneous NO and mercury removal in industrial flue gas due to the commercial selective catalytic reduction (SCR) molecular sieves' lack of demercuration active centers. Herein, we demonstrate an active site in situ reconfiguration approach to enhance the oxidation of elemental mercury and immobilize divalent mercury by modified commercial SCR catalysts.
View Article and Find Full Text PDFUnveiling Trade-Off and Synergy in Simultaneous Removal of NO, CO, and NH on Mixed Metal Oxide Nanostructure Catalysts.
ACS Nano
January 2025
Department of Materials Science and Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919 Republic of Korea.
The simultaneous removal reaction (SRR) is a pioneering approach for achieving the simultaneous removal of anthropogenic NO and CO pollutants through catalytic reactions. To facilitate this removal across diverse industrial fields, it is crucial to understand the trade-offs and synergies among the multiple reactions involved in the SRR process. In this study, we developed mixed metal oxide nanostructures derived from layered double hydroxides as catalysts for the SRR, achieving high catalytic conversions of 93.
View Article and Find Full Text PDFBehaviors of bio-modified calcium-based sorbents for simultaneous CO/NO removal: Correlation of the characteristics of biomass, modified Ca-sorbent and reactivity.
J Environ Manage
December 2024
Key Laboratory of Energy Thermal Conversion and Control, Ministry of Education, School of Energy and Environment, Southeast University, Nanjing, 210096, PR China.
Article Synopsis
- Simultaneous removal of CO and NO from flue gas is important for reducing atmospheric pollutants and carbon emissions.
- An optimized calcium oxide (CaO) system is proposed using bio-modified calcium-based pellets, where biomass pyrolysis enhances efficiency.
- The study finds that different biomass types impact pellet characteristics, with cellulose improving pellet structure for better CO/NO removal, while lignin increases biochar production, affecting capture performance based on pore structure and biochar content.
Induce (101) plane exposure boosting photocatalytic CO reduction in aerobic environment for NH-MIL-125.
J Colloid Interface Sci
December 2024
College of Materials Science and Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, PR China. Electronic address:
NH-MIL-125 with abundant porosity and specific interactions with CO molecules, has been demonstrate great potential in the field of photocatalytic CO reduction. However, conventional NH-MIL-125 and their composites much lower CO photoreduction efficiency in aerobic environments because of the O competition. To circumvent the issue, this study modifies NH-MIL-125 through crystal facet engineering to enhance its selective CO adsorption and photocatalytic efficiency in the environment of impurity CO.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!