During the physiological period, women have the problem of lateral and posterior leakage, and they expect to have period underwear that can reduce lateral and posterior leakage. This study is combined with menstrual needs, and in the crotch penetration layer, three types of yarns are used, seaweed viscose yarn, apocynum viscose yarn, and viscose yarn, as well as two fabric structures: honeycomb-shaped convex-concave stitching and grid-shaped convex point stitching. In the crotch absorption layer, three types of yarns are used, modal yarn, bamboo yarn, and viscose yarn, as well as two fabric structures: plush stitching and plain stitching. The above two parts establish a sample scheme according to full-factor experimental tests, and 12 knitted fabric samples were knitted. The experimental data were analyzed through SPSS one-way ANOVA. The results indicate that in terms of veil raw materials, the crotch penetration layer with seaweed viscose yarn has better penetration performance, while the crotch absorption layer with bamboo yarn has better absorption performance. In terms of fabric structure, the crotch penetration layer with grid-shaped convex point stitching has better penetration performance, while the crotch absorption layer with plush stitching has better absorption performance. This study provides a theoretical basis for the development of period underwear.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10935086PMC
http://dx.doi.org/10.3390/ma17051119DOI Listing

Publication Analysis

Top Keywords

viscose yarn
20
absorption performance
12
performance crotch
12
period underwear
12
crotch penetration
12
penetration layer
12
crotch absorption
12
absorption layer
12
lateral posterior
8
posterior leakage
8

Similar Publications

Article Synopsis
  • This study focuses on improving high-performance 3D printing composite filaments by enhancing fibre wetting and distribution using two techniques: solution (solvent-based) and emulsion (water-based) impregnation.
  • Results showed that solution impregnation significantly increased the tensile strength of PLA/bleached flax filaments (356 MPa), while emulsion impregnation was more effective for PLA/viscose filaments (255 MPa) due to enhanced fibre interactions.
  • The research highlights the potential for 3D-printed composites made from bio-derived materials, with impressive mechanical properties, supporting their use in large-scale additive manufacturing for structural applications.
View Article and Find Full Text PDF
Article Synopsis
  • This research examines how body odors transfer to different textile fibers using a method that mimics liquid sweat, focusing on a variety of odorous volatile organic compounds.
  • A study was conducted using proton transfer reaction mass spectrometry to measure the release of these compounds at different time intervals across six types of fabrics.
  • Results show that cellulosic fibers (like cotton) retain odors differently compared to synthetic fibers (like nylon and polyester), with variations in the intensity of ketones and aldehydes released over time.
View Article and Find Full Text PDF

Non-invasive identification of historical textiles and leather by means of external reflection FTIR spectroscopy.

Spectrochim Acta A Mol Biomol Spectrosc

February 2025

Dipartimento di Scienze Umane e dell'Innovazione per il Territorio, Università degli Studi dell'Insubria, Via Sant'Abbondio 12, 22100 Como, Italy; Centro Speciale di Scienze e Simbolica dei Beni Culturali, Università degli Studi dell'Insubria, Via Sant'Abbondio 12, 22100 Como, Italy.

Article Synopsis
  • Identifying fibres in historical textiles is challenging due to the wide range of materials used, including plant, animal, and synthetic options, along with the complications posed by leather components.
  • Traditional methods like microscopic examination and ATR-FTIR spectroscopy often require sampling, which can be restricted for valuable objects.
  • This paper introduces a non-invasive technique using External Reflection (ER) FTIR spectroscopy, demonstrating its effectiveness in identifying various fibres in historical textiles without damaging the samples, and providing insights into the evolution of materials used in Japanese samurai armours from the 16th to the 20th century.
View Article and Find Full Text PDF

Upcycling of cellulosic textile waste with bacterial cellulose via Ioncell® technology.

Int J Biol Macromol

June 2024

Department of Bioproducts and Biosystems, Aalto University, P.O Box 16300, 00076 Aalto Espoo, Finland. Electronic address:

Currently the textile industry relies strongly on synthetic fibres and cotton, which contribute to many environmental problems. Man-made cellulosic fibres (MMCF) can offer sustainable alternatives. Herein, the development of Lyocell-type MMCF using bacterial cellulose (BC) as alternative raw material in the Ioncell® spinning process was investigated.

View Article and Find Full Text PDF

Quality Assessment of Socks Produced from Viscose and Lyocell Fibers.

Materials (Basel)

March 2024

Department of Textile Design and Menagement, University of Zagreb Faculty of Textile Technology, Prilaz baruna Filipovića 28a, 10000 Zagreb, Croatia.

Most casual socks are produced from cotton and are usually combined with synthetic fibers. The suitability of viscose and lyocell fibers for knitting socks needs to be investigated further. Therefore, three series of plain socks were produced, composed in the largest content from single-spun viscose or lyocell yarns fully plated with texturized polyamide 6.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!