Renewable lignin-derived heteroatom-doped porous carbon nanosheets as an efficient oxygen reduction catalyst for rechargeable zinc-air batteries.

J Colloid Interface Sci

College of Chemistry and Chemical Engineering, Collaborative Innovation Center for Hydrogen Energy Key Materials and Technologies of Shandong Province, Qingdao University, Qingdao 266071, PR China; School of Petroleum and Chemical Engineering, Dongying Vocational Institute, Dongying 257091, PR China. Electronic address:

Published: June 2024

Lignin upgrading to various functional products is promising to realize high-value utilization of low-cost and renewable biomass waste, but is still in its infancy. Herein, using industry waste lignosulfonate as the biomass-based carbon source and urea as the dopant, we constructed a heteroatom-doped porous carbon nanosheet structure by a simple NaCl template-assisted pyrolytic strategy. Through the synergistic effect of the NaCl template and urea, the optimized lignin-derived porous carbon catalyst with high content of active nitrogen species and large specific surface area can be obtained. As a result, the fabricated catalysts exhibited excellent electrocatalytic oxygen reduction activity, as well as good methanol tolerance and stability, comparable to that of commercial Pt/C. Moreover, rechargeable Zn-air batteries assembled with this electrocatalyst have a peak power density of up to 150 mW cm and prominent long-term cycling stability. This study offers an inexpensive and efficient way for the massive production of highly active metal-free catalysts from the plentiful, inexpensive and environmentally friendly lignin, offering a good direction for biomass waste recycling and utilization.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jcis.2024.03.022DOI Listing

Publication Analysis

Top Keywords

porous carbon
12
heteroatom-doped porous
8
oxygen reduction
8
biomass waste
8
renewable lignin-derived
4
lignin-derived heteroatom-doped
4
carbon
4
carbon nanosheets
4
nanosheets efficient
4
efficient oxygen
4

Similar Publications

Due to the industry's rapid growth, the presence of organic pollutants, especially antibiotics, in water and wastewater resources is the main concern for wildlife and human health. Therefore, these days, a significant challenge is developing an efficient, sustainable, and eco-friendly photocatalyst. Natural biological models have numerous advantages compared to artificial model materials.

View Article and Find Full Text PDF

High-Performance Thermoelectric Composite of BiTe Nanosheets and Carbon Aerogel for Harvesting of Environmental Electromagnetic Energy.

ACS Nano

January 2025

State Key Laboratory of Materials Processing and Die & Mould Technology, and School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei, P. R. China.

Intensifying the severity of electromagnetic (EM) pollution in the environment represents a significant threat to human health and results in considerable energy wastage. Here, we provide a strategy for electricity generation from heat generated by electromagnetic wave radiation captured from the surrounding environment that can reduce the level of electromagnetic pollution while alleviating the energy crisis. We prepared a porous, elastomeric, and lightweight BiTe/carbon aerogel (CN@BiTe) by a simple strategy of induced in situ growth of BiTe nanosheets with three-dimensional (3D) carbon structure, realizing the coupling of electromagnetic wave absorption (EMA) and thermoelectric (TE) properties.

View Article and Find Full Text PDF

Gradient porous carbon has become a potential electrode material for energy storage devices, including the aqueous zinc-ion hybrid capacitor (ZIHC). Compared with the sufficient studies on the fabrication of ZIHCs with high electrochemical performance, there is still lack of in-depth understanding of the underlying mechanisms of gradient porous structure for energy storage, especially the synergistic effect of ultramicropores (<1 nm) and micropores (1-2 nm). Here, we report a design principle for the gradient porous carbon structure used for ZIHC based on the data-mining machine learning (ML) method.

View Article and Find Full Text PDF

Prussian blue analogs (PBAs), as a classical kind of microporous materials, have attracted substantial interests considering their well-defined framework structures, unique physicochemical properties and low cost. However, PBAs typically adopt cubic structure that features small pore size and low specific surface area, which greatly limits their practical applications in various fields ranging from gas adsorption/separation to energy conversion/storage and biomedical treatments. Here we report the facile and general synthesis of unconventional hexagonal open PBA structures.

View Article and Find Full Text PDF

Bioactive microspheres to enhance sonodynamic-embolization-metalloimmune therapy for orthotopic liver cancer.

Biomaterials

December 2024

Institute of Functional Nano & Soft Materials (FUNSOM), Jiangsu Key Laboratory for Carbon Based Functional Materials & Devices, Soochow University, Suzhou, 215123, China. Electronic address:

The development of novel microspheres for the combination of sonodynamic therapy (SDT) with transarterial embolization (TAE) therapy to amplify their efficacy has received increasing attention. Herein, a novel strategy for encapsulating sonosensitizers (e.g.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!