Selective recovery of boron, cobalt, gallium and germanium from seawater solar saltworks brines using N-methylglucamine sorbents: Column operation performance.

Sci Total Environ

Chemical Engineering Department, Escola d'Enginyeria de Barcelona Est (EEBE), Universitat Politècnica de Catalunya (UPC)-BarcelonaTECH, C/Eduard Maristany 16, Campus Diagonal-Besòs, 08019 Barcelona, Spain; Barcelona Research Center for Multiscale Science and Engineering, C/Eduard Maristany 16, Campus Diagonal-Besòs, 08019 Barcelona, Spain; CETaqua, Carretera d'Esplugues, 75, 08940 Cornellà de Llobregat, Spain.

Published: May 2024

The European Union (EU) identified a list of Critical Raw Materials (CRMs) crucial for its economy, aiming to find alternative sources. Seawater is a promising option as it contains almost all elements, although most at low concentrations. However, to the present, the CRMs' recovery from seawater is technically and economically unfeasible. Other alternatives to implement sea mining might be preferred, such as reverse osmosis brines or saltworks bitterns (after sodium chloride crystallisation). The CRMs' extraction in a selective way can be achieved using highly selective recovery processes, such as chelating sorbents. This study focuses on extracting Trace Elements (TEs) from solar saltworks brines, including boron, cobalt, gallium and germanium, using commercial N-methylglucamine sorbents (S108, CRB03, CRB05). The application of these sorbents has shown potential for boron recovery, but their selectivity for cobalt, gallium, and germanium requires further investigation. This research aims to assess these sorbents' kinetics and column mode performance for TEs recovery from synthetic bitterns. Boron and germanium were rapidly sorbed, reaching equilibrium (>90 %) within 1 h, except for S108, which took 2 h. In column mode, 20-25 pore volumes of bittern were treated to remove boron and germanium, but competition from other elements reduced treatment capacity. An acidic elution (1 M hydrochloric acid) allowed to elute them (>90 %), reaching concentration factors for germanium and boron of 35 and 11, respectively, while cobalt and gallium had less affinity for the sorbents. In addition, the experiments performed were fitted by a mass transfer model to determine the equilibrium constants and selectivities. Therefore, bittern mining has been proven as a secondary/alternative source to obtain CRMs, which can lead the EU to a position in which its dependence on other countries to obtain these raw materials would be decreased.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.scitotenv.2024.171438DOI Listing

Publication Analysis

Top Keywords

cobalt gallium
16
boron cobalt
12
gallium germanium
12
selective recovery
8
solar saltworks
8
saltworks brines
8
n-methylglucamine sorbents
8
raw materials
8
column mode
8
boron germanium
8

Similar Publications

Inductively coupled plasma mass spectrometry was employed to determine the content of 25 inorganic elements in Bambusae Concretio Silicea, and the elemental fingerprint was established according to the element content. SPSS 20.0 and SIMCA 14.

View Article and Find Full Text PDF

Due to its distinctive structure and unique physicochemical properties, gallium nitride (GaN) has been considered a prospective candidate for lithium storage materials. However, its inferior conductivity and unsatisfactory cycle performance hinder the further application of GaN as a next-generation anode material for lithium-ion batteries (LIBs). To address this, cobalt (Co)-doped GaN (Co-GaN) nanowires have been designed and synthesized by utilizing the chemical vapor deposition (CVD) strategy.

View Article and Find Full Text PDF

Forecasting demand data for critical materials.

Data Brief

December 2024

National Institute of Standards & Technology, 100 Bureau Drive, Gaithersburg, MD 20899, United States.

Gallium, Indium and Cobalt are critical materials that are vital to ramping up the adoption of clean energy technologies such as solar photovoltaics (PVs), electric vehicles (EVs) and wind turbines (WTs). Like other critical materials, they are prone to supply chain risks resulting in future uncertainty associated with supply, demand and price parameters. Understanding current and future market dynamics will mitigate this uncertainty.

View Article and Find Full Text PDF

Selected social impact indicators influenced by materials for green energy technologies.

Nat Commun

October 2024

School of Engineering Science, Industrial Engineering and Management (IEM), LUT University, Lappeenranta, Finland.

The social risks of green energy transition are underexplored. One of the important questions is which materials used in green energy technologies offer the greatest social benefits, such as ensuring decent living conditions, and which pose the most social risks. To address this issue, we develop a dynamic material-energy flow model integrating system dynamics, social life cycle assessment, and geometallurgical approaches.

View Article and Find Full Text PDF

Considering the potential advantages of minimally sized corroles for diverse applications, this study reports a facile access to cyano-substituted derivatives via a rare CF/CN conversion. Investigation of the fully characterized gallium, phosphorus, and cobalt complexes discloses multiple effects of the meso-nitrile groups attached to the macrocycle. This corrole appears to be the most electron poor derivative which comes into play in the redox potentials of the corresponding complexes.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!