In this work, unusual potentiometric hydrogen sensing of mixed conducting BaSrCoFeO was reported. Inspired by the unusual polarity, a dual sensing electrode (SE) potentiometric hydrogen sensor was fabricated by pairing BaSrCoFeO with electronic conducting ZnO to enhance the hydrogen response. Hydrogen sensing measurements suggested that significantly higher response, larger sensitivity, and lower limit of detection (LOD) were achieved by the dual SE sensor when compared with the single SE sensor based on BaSrCoFeO or ZnO. A high response of 97.3 mV for 500 ppm hydrogen and a low LOD of 2.5 ppm were obtained by the dual SE sensor at 450 °C. Furthermore, the effect of the Fe doping concentration in BaSrCoFeO ( = 0.2, 0.5, and 0.8) on hydrogen sensing response was investigated. The potentiometric response values to hydrogen increased monotonically with increasing Fe doping concentration. With the Fe/Co atomic ratio increased from 0.25 to 4, the responses to 500 ppm hydrogen raised by 69.6 and 94% at 350 and 450 °C, respectively. The sensing behaviors of unusual BaSrCoFeO may be ascribed to the predominant surface electrostatic effect. These results show that mixed conducting BaSrCoFeO is desirable for developing high-performance dual SE hydrogen sensors.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10905735PMC
http://dx.doi.org/10.1021/acsomega.3c06833DOI Listing

Publication Analysis

Top Keywords

hydrogen sensing
16
potentiometric hydrogen
12
hydrogen
10
sensing response
8
based basrcofeo
8
unusual polarity
8
mixed conducting
8
conducting basrcofeo
8
dual sensor
8
500 ppm
8

Similar Publications

This study presents the fabrication of a sustainable flexible humidity sensor utilizing chitosan derived from mealworm biomass as the primary sensing material. The chitosan-based humidity sensor was fabricated by casting chitosan and polyvinyl alcohol (PVA) films with interdigitated copper electrodes, forming a laminate composite suitable for real-time, resistive-type humidity detection. Comprehensive characterization of the chitosan film was performed using Fourier-transform infrared (FTIR) spectroscopy, contact angle measurements, and tensile testing, which confirmed its chemical structure, wettability, and mechanical stability.

View Article and Find Full Text PDF

The trace detection of pyocyanin (PCN) is crucial for infection control, and electrochemical sensing technology holds strong potential for application in this field. A pivotal challenge in utilizing carbon materials within electrochemical sensors lies in constructing carbon-based films with robust adhesion. To address this issue, a novel composite hydrogel consisting of multi-walled carbon nanotubes/polyvinyl alcohol/phosphotungstic acid (MWCNTs/PVA/PTA) was proposed in this study, resulting in the preparation of a highly sensitive and stable PCN electrochemical sensor.

View Article and Find Full Text PDF

L-Shaped Coplanar Strip Dipole Antenna Sensor for Adulteration Detection.

Sensors (Basel)

January 2025

Department of Civil Environmental and Mechanical Engineering, University of Trento, 38123 Trento, Italy.

The present study proposes an L-shaped coplanar strip dipole antenna for sensing the presence of adulterants in liquid food samples. The proposed antenna dimensions are optimized using ANSYS HFSS, and a prototype is fabricated and validated. The sensing region is optimized based on the current distribution and measured reflection coefficients.

View Article and Find Full Text PDF

Hydrogen has emerged as a prominent candidate for future energy sources, garnering considerable attention. Given its explosive nature, the efficient detection of hydrogen (H) in the environment using H sensors is paramount. Chemoresistive H sensors, particularly those based on noble-metal-decorated metal oxide semiconductors (MOSs), have been extensively researched owing to their high responsiveness, low detection limits, and other favorable characteristics.

View Article and Find Full Text PDF

Interaction between Hydrogen and Magnesium Films: From Hydrogenochromism to Applications.

ACS Appl Mater Interfaces

January 2025

National Engineering Research Center of Light Alloy Net Forming and State Key Laboratory of Metal Matrix Composite, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, P. R. China.

Hydrogen, as a promising clean energy carrier, underscores the critical need for reliable detection technologies to ensure its safe and efficient use. Magnesium (Mg) thin films, with their hydrogenochromic properties, are particularly well-suited for hydrogen sensing applications due to their dramatic optical transitions. However, practical implementation faces challenges in achieving both rapid response and durability under cyclic conditions.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!