Objective: Newer all-suture, all-inside meniscus repair devices utilize soft suture anchors. The purpose of this study was to compare the biomechanical performance of 4 meniscus repair devices in human cadaver menisci: the JuggerStitch (all-suture, all-inside), the FiberStitch (all-suture, all-inside), a polyether ether ketone (PEEK) all-inside, and an inside-out device.

Design: Forty human cadaver menisci were tested after creating 20 mm longitudinal tears in the posterior meniscus. Each knee was randomized to 1 of 4 meniscus repair groups: JuggerStitch (all-suture, all-inside), FiberStitch (all-suture, all-inside), FAST-FIX 360 (PEEK-based anchor all-inside), and inside-out (with Broadband tape meniscus needles). For each meniscus, 2 devices were used to prepare vertical mattress repair construct. The specimens were tested by pre-conditioning 20 cycles between 5 N and 30 N and then the tear diastasis was measured, followed by distraction to failure phase after imposing a displacement at a rate of 0.5 mm/s.

Results: Ten menisci were tested in each of the 4 groups. After pre-conditioning, there was no significant difference in the gap formation among groups ( = 0.212). The average failure load for the JuggerStitch, FiberStitch, PEEK all-inside, and inside-out was 384 N, 311 N, 207 N, and 261 N, respectively, with a significant difference between groups ( = 0.034). analysis showed the JuggerStitch failure load was higher than the PEEK all-inside and inside-out ( = 0.005, and = 0.045, respectively). There was no significant difference between the failure load of the JuggerStitch and FiberStitch ( = 0.225).

Conclusion: The JuggerStitch all-suture device, FiberStitch all-suture device, PEEK all-inside, and inside-out devices have similar biomechanical properties for gapping and stiffness. The JuggerStitch all-suture, all-inside device has superior failure load compared with the PEEK all-inside and inside-out repair for longitudinal meniscus tear repair.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11569520PMC
http://dx.doi.org/10.1177/19476035241234315DOI Listing

Publication Analysis

Top Keywords

all-suture all-inside
28
all-inside inside-out
24
peek all-inside
20
meniscus repair
16
juggerstitch all-suture
16
failure load
16
all-inside
13
repair devices
12
fiberstitch all-suture
12
all-suture
9

Similar Publications

All-inside techniques are based on devices that use PEEK (polyether ether ketone) or biocomposite anchors placed at extracapsular locations such as anchorage points over which the sutures are tied. However, because of complications like irritability and intra-articular migration of these hard anchors, suture-based all-inside meniscal repair systems are now gaining popularity. Although these devices have advantages over conventional all-inside devices, they are costly, thus limiting their widespread use.

View Article and Find Full Text PDF

Purpose: The purpose of this study was to compare the biomechanical properties of a latest generation all-suture anchor repair device (ASARD) for meniscal repair with that of a latest generation PEEK-cage anchor repair device (PCARD) in an experimental setting using cadaveric menisci.

Methods: Twenty-six menisci were obtained from the knees of fresh body donors. Artificially created meniscal lesions were treated randomly, using a single stitch with either an ASARD or a PCARD.

View Article and Find Full Text PDF

Background: Recently, all-suture, all-inside meniscal repair devices-including devices containing flat sutures or tapes-have been introduced. Similar to those in suture anchors, these modifications may have different performance characteristics than conventional sutures and polyether ether ketone (PEEK)-anchored devices.

Purpose: To compare the biomechanical characteristics of all-suture meniscal repair devices with those of a conventional PEEK-anchored device and an inside-out meniscal suture construct.

View Article and Find Full Text PDF

Objective: Newer all-suture, all-inside meniscus repair devices utilize soft suture anchors. The purpose of this study was to compare the biomechanical performance of 4 meniscus repair devices in human cadaver menisci: the JuggerStitch (all-suture, all-inside), the FiberStitch (all-suture, all-inside), a polyether ether ketone (PEEK) all-inside, and an inside-out device.

Design: Forty human cadaver menisci were tested after creating 20 mm longitudinal tears in the posterior meniscus.

View Article and Find Full Text PDF

Background: Meniscal extrusion is a phenomenon in which a degenerative posterior horn tear, radial tear, or root tear results in displacement of the body of the meniscus medial to the tibial rim. The paramount function of the meniscus is to provide load distribution across the knee joint. Meniscal extrusion will prevent the meniscus from properly fulfilling this function and eventually leads to progression of osteoarthritis.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!