Construction and demolition waste (CDW) worldwide generation accounts 10 billion tonnes yearly. The major fraction is landfilled requiring innovative recycling methods to reduce the associated environmental impacts and to increase its circularity. Our study demonstrated the feasibility of using different CDW fines to develop recycled cements and optimized the content of CDW recycled cements with well-graded crushed stone (WGCS) for use as pavement base layer. We scaled up the study obtaining CDW cement and aggregates from a local recycling plant, as well as pilot pavement sections designed, constructed and field deflections measured. As results, the CDW cement pastes exhibited accumulated heat values of up to 111 J g and achieved a compressive strength of approximately 16 MPa. The unconfined compressive strength and resilient modulus (RM) achieved using CDW cement and WGCS were 2-3 and >3000 MPa, respectively. The sections constructed using CDW cement exhibited intermediate behaviour compared to those obtained using reference materials (6% Portland cement-WGCS and a conventional granular base made using WGCS). The deflection decreased over time owing to the pozzolanic reaction.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1177/0734242X241227370 | DOI Listing |
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11689967 | PMC |
Sci Rep
December 2024
Civil Engineering Department, Kampala International University, Kampala, Uganda.
The present research incorporates five AI methods to enhance and forecast the characteristics of building envelopes. In this study, Response Surface Methodology (RSM), Support Vector Machine (SVM), Gradient Boosting (GB), Artificial Neural Networks (ANN), and Random Forest (RF) machine learning method for optimization and predicting the mechanical properties of natural fiber addition incorporated with construction and demolition waste (CDW) as replacement of Fine Aggregate in Paver blocks. In this study, factors considered were cement content, natural fine aggregate, CDW, and coconut fibre, while the resulting measure was the machinal properties of the paver blocks.
View Article and Find Full Text PDFMaterials (Basel)
October 2024
Magnel-Vandepitte Laboratory, Department of Structural Engineering and Building Materials, Faculty of Engineering and Architecture, Ghent University, Technologiepark Zwijnaarde 60, 9052 Gent, Belgium.
This review presents the scope of current efforts to utilize recycled construction and demolition waste in mortars for masonry. More than 100 articles are divided into groups pertaining to the type of mortar, different binder systems, the type of construction and demolition waste (CDW), and its utilization specifics. Cement-based mortars dominate this research domain, whereas recycled concrete is the main material employed to replace virgin aggregates, followed by recycled masonry and recycled mixed waste aggregates.
View Article and Find Full Text PDFJ Environ Manage
September 2024
Department of Earth and Environmental Sciences, Korea University, Seoul, South Korea. Electronic address:
Construction and demolition wastes (CDWs) have become a significant environmental concern due to urbanization. CDWs in landfill sites can generate high-pH leachate and various constituents (e.g.
View Article and Find Full Text PDFMaterials (Basel)
March 2024
Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, Shenzhen University, Shenzhen 518060, China.
The recycling of construction and demolition waste (CDW) for the extraction of recycled concrete aggregates (RCAs) to be used to produce recycled aggregate concrete (RAC) is widely acknowledged internationally. However, CDW not only contains concrete debris but may also contain burnt clay bricks. The recycling of such CDW without the segregation of different components would result in recycled aggregates having different proportions of concrete and brick aggregates.
View Article and Find Full Text PDFWaste Manag Res
January 2025
National Institute on Advanced Eco-Efficient Cement-Based Technologies, Brazil. Escola Politecnica, University of São Paulo, São Paulo, Brazil.
Construction and demolition waste (CDW) worldwide generation accounts 10 billion tonnes yearly. The major fraction is landfilled requiring innovative recycling methods to reduce the associated environmental impacts and to increase its circularity. Our study demonstrated the feasibility of using different CDW fines to develop recycled cements and optimized the content of CDW recycled cements with well-graded crushed stone (WGCS) for use as pavement base layer.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!