Aim: To compare eight large- and low-tapered heat-treated reciprocating instruments regarding their design, metallurgy, mechanical properties, and irrigation flow through an in silico model.
Methodology: A total of 472 new 25-mm E-Flex Rex (25/.04 and 25/.06), Excalibur (25/.05), Procodile (25/.06), Reciproc Blue R25 (25/.08v), WaveOne Gold Primary (25/.07v), and Univy Sense (25/.04 and 25/.06) instruments were evaluated regarding their design (stereomicroscopy, scanning electron microscopy, and 3D surface scanning), metallurgy (energy-dispersive X-ray spectroscopy and differential scanning calorimetry), and mechanical performance (cyclic fatigue, torsional resistance, cutting ability, bending and buckling resistance). Computational fluid dynamics assessment was also conducted to determine the irrigation flow pattern, apical pressure, and wall shear stress in simulated canal preparations. Kruskal-Wallis and one-way anova post hoc Tukey tests were used for statistical comparisons (α = 5%).
Results: Instruments presented variations in blade numbers, helical angles, and tip designs, with all featuring non-active tips, symmetrical blades, and equiatomic nickel-titanium ratios. Cross-sectional designs exhibited an S-shaped geometry, except for WaveOne Gold. Univy 25/.04 and Reciproc Blue displayed the smallest and largest core diameters at D3. Univy 25/.04 and E-Flex Rec 25/.04 demonstrated the longest time to fracture (p < .05). Reciproc Blue and Univy 25/.04 exhibited the highest and lowest torque to fracture, respectively (p < .05). Univy 25/.04 and Reciproc Blue had the highest rotation angles, whilst E-Flex Rec 25/.06 showed the lowest angle (p < .05). The better cutting ability was observed with E-Flex Rec 25/.06, Procodile, Excalibur, and Reciproc Blue (p > .05). Reciproc R25 and E-Flex Rec showed the highest buckling resistance values (p < .05), with WaveOne Gold being the least flexible instrument. The impact of instruments' size and taper on wall shear stress and apical pressure did not follow a distinct pattern, although Univy 25/.04 and E-Flex Rec 25/.06 yielded the highest and lowest values for both parameters, respectively.
Conclusions: Low-tapered reciprocating instruments exhibit increased flexibility, higher time to fracture, and greater angles of rotation, coupled with reduced maximum bending loads and buckling strength compared to large-tapered instruments. Nevertheless, low-tapered systems also exhibit lower maximum torque to fracture and inferior cutting ability, contributing to a narrower apical canal enlargement that may compromise the penetration of irrigants in that region.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1111/iej.14047 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Safety and efficacy of low-powered holmium laser enucleation of the prostate in comparison with plasma kinetic resection of prostate.
Lasers Med Sci
December 2024
Department of Urology Surgery, Beijing Traditional Chinese Medicine Hospital Affiliated to Capital Medical University, No.23 Art Museum Back Street, Dongcheng District, Beijing, 100010, China.
To compare the efficacy and safety of low-power holmium laser enucleation of the prostate (LP-HoLEP) with plasma kinetic resection of prostate (PKRP). Sixty-three patients treated with transurethral LP-HoLEP (observation group) and 68 patients treated with transurethral PKRP (control group) at Beijing Hospital of Traditional Chinese Medicine from November 2019 to November 2022 were retrospectively compared with regard to operation duration, intra-operative blood loss, prostate resection ratio, postoperative bladder irrigation time, postoperative indwelling urinary catheter time, postoperative urinary incontinence incidence, International Prostate Symptom Scale (IPSS), maximum urine flow rate (Qmax), and residual urine volume (RUV). In both groups, postoperative IPSS, Qmax, and RUV were significantly improved compared to preoperative values (P < 0.
View Article and Find Full Text PDFRisk factors of systemic inflammatory response syndrome after minimally invasive percutaneous nephrolithotomy with a controlled irrigation pressure.
BMC Urol
December 2024
Department of Urology, Dongguan Tungwah Hospital, Dongguan, Guang dong, 523110, China.
Objective: This study aims to identify the risk factors for systemic inflammatory response syndrome (SIRS) after minimally invasive percutaneous nephrolithotomy (PCNL) with a controlled irrigation pressure and to find which patients undergoing PCNL are likely to develop SIRS under the pressure-controlled condition.
Methods: A total of 303 consecutive patients who underwent first-stage PCNL in our institute between July 2016 and June 2018 were retrospectively reviewed. All the procedures were performed with an 18 F tract using an irrigation pump setting the irrigation fluid pressure at 110 mmHg and the flow rate of irrigation at 0.
Comparative Assessment of Push-Out Bond Strength and Dentinal Tubule Penetration of Different Calcium-Silicate-Based Endodontic Sealers.
Dent J (Basel)
December 2024
Faculty of Dentistry, Iuliu Hatieganu University of Medicine and Pharmacy, 400012 Cluj-Napoca, Romania.
Adhesion within endodontic obturation material and root canal walls improves the efficacy of the endodontic treatment by establishing a barrier that inhibits reinfection and entombs residual bacteria. This study evaluates the push-out bond strength (POBS) of calcium silicate sealers compared to an epoxy-resin-based sealer. A total of 36 extracted mono-radicular teeth were prepared with Pro Taper Ultimate and irrigated with 5.
View Article and Find Full Text PDFAssessing Regional Strategies to Cope with Drought, Climate, and Environmental Flow Policy Impacts for a Sustainable Water Supply: A Case Study of the Bay Area.
Environ Sci Technol
December 2024
Department of Civil and Environmental Engineering, Stanford University, Stanford, California 94305, United States.
California's Bay-Delta watershed encompasses 40% of the state's runoff and serves water supply and irrigation needs throughout the state. A recently amended policy attempts to rebalance water supply and ecological outcomes by requiring 40% of the flow to remain in-stream in the Tuolumne River and other tributaries between February 1 and June 30 each year. This policy impacts water supply diversions serving millions of customers in the San Francisco Bay Area.
View Article and Find Full Text PDFEvaluation of drain quality and nutrient load management scenarios by using QUAL2kw model.
Environ Monit Assess
December 2024
Department of Water Engineering, University of Guilan, Rasht, Iran.
The examination of wastewater and effluents flowing into receiving water bodies is crucial for identifying pollutant sources and implementing scenarios to reduce them. In this study, QUAL2kw was used to identify, assess, and predict the pollutant load of a drainage canal located 6 km away from Anzali Wetland. Initially, the model was calibrated and validated with data collected in 2017.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!