A Data-Mining Interpretation Method of Pavement Dynamic Response Signal by Combining DBSCAN and Findpeaks Function.

During a heavy traffic flow featuring a substantial number of vehicles, the data reflecting the strain response of asphalt pavement under the vehicle load exhibit notable fluctuations with abnormal values, which can be attributed to the complex operating environment. Thus, there is a need to create a real-time anomalous-data diagnosis system which could effectively extract dynamic strain features, such as peak values and peak separation from the large amount of data. This paper presents a dynamic response signal data analysis method that utilizes the DBSCAN clustering algorithm and the findpeaks function. This method is designed to analyze data collected by sensors installed within the pavement. The first step involves denoising the data using low-pass filters and other techniques. Subsequently, the DBSCAN algorithm, which has been improved using the K-Dist method, is used to diagnose abnormal data after denoising. The refined findpeaks function is further implemented to carry out the adaptive feature extraction of the denoised data which is free from anomalies. The enhanced DBSCAN algorithm is tested via simulation and illustrates its effectiveness while detecting abnormal data in the road dynamic response signal. The findpeaks function enables the relatively accurate identification of peak values, thus leading to the identification of strain signal peaks of complex multi-axle lorries. This study is valuable for efficient data processing and effective information utilization in pavement monitoring.