Photocurrent response loss of dye sensitized solar cells owing to top surface growth and bundling of anodic TiO nanotubes.

In this research, the effect of anodization time on the length of the titanium oxide nanotube arrays (TNAs) and photovoltaic parameters of back-side illuminated dye-sensitized solar cells (DSSCs) were investigated. The TNAs were characterized using X-ray diffraction (X-ray) or (XRD), and scanning electron microscopy (SEM). Anodic TNAs having tube lengths from 7.9 to 20.17 μm were produced in ethylene glycol containing ammonium fluoride-NHF by increasing the anodizing time from 20 min to 6 h. Based on I-V curves, the power conversion efficiency (PCE) of back-side illuminated dye sensitized solar cells (DSSCs) increased for TNAs grown for up to 120 min, but decreased afterward. Using electrochemical impedance spectroscopy (EIS), we understand that the resistance of the TNAs decreased from 94.82 Ω cm for TNAs anodized for 20 min down to 50.43 Ω cm for those TNAs anodized for 120 min, however, it increases for TNAs anodized for longer periods of time. Furthermore, the short circuit current density (J) increased from 3.14 to 5.67 mA cm during 2 h anodic oxidation for TNAs, and leading to enhanced efficiency of about 200 % (from 1.19 % to 2.45 %). We interpret this behaviour with the top surface morphology evolution of TNAs as a function of anodization time which is associated with the formation of top surface nanograss and bundling the tubes for specific durations.