Silver powder, as the primary component of solar silver paste, significantly influences various aspects of the paste's performance, including printing, sintering, and conductivity. This study reveals that, beyond the shape and size of the silver powders, their microstructure is a critical factor influencing the performance of both silver powders and silver pastes in solar cell applications. The growth process leads to the formation of either polycrystalline aggregated silver powder or crystal growth silver powder. Analyzing the performance characteristics of these different microstructures provides guidance for selecting silver powders for silver pastes at different sintering temperatures. Polycrystalline aggregated silver powder exhibits higher sintering activity, with a sintering initiation temperature around 450 °C. The resulting silver paste, sintered at 750 °C, demonstrates a low sheet resistance of 2.92 mΩ/sq and high adhesion of 2.13 N. This silver powder is suitable for formulating silver pastes with lower sintering temperatures. The solar cell electrode grid lines have a high aspect ratio of 0.37, showing poor uniformity. However, due to the high sintering activity of the silver powder, the glass layer dissolves and deposits more silver, resulting in excellent conductivity, a low contact resistance of the silver electrode, a low series resistance of the solar cell of 1.23 mΩ, and a high photoelectric conversion efficiency of 23.16%. Crystal growth silver powder exhibits the highest tap density of 5.52 g/cm. The corresponding silver paste shows improved densification upon sintering, especially at 840 °C, yielding a sheet resistance of 2.56 mΩ/sq and adhesion of 3.05 N. This silver powder is suitable for formulating silver pastes with higher sintering temperatures. The solar cell electrode grid lines are uniform with the highest aspect ratio of 0.40, resulting in a smaller shading area, a high fill factor of 81.59%, and a slightly higher photoelectric conversion efficiency of 23.17% compared to the polycrystalline aggregated silver powder.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10820057 | PMC |
| http://dx.doi.org/10.3390/ma17020445 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Antifungal potential of silver nanoparticles stabilized with the flavonoid naringenin.
J Med Microbiol
January 2025
Medical Mycology Laboratory, Department of Clinical Analysis and Biomedicine, State University of Maring, Colombo Avenue, 5790, Maring, PR, Brazil.
Fungal infections caused by yeast have increased in recent decades, becoming a major threat to public health. Antifungal therapy represents a challenging problem because, in addition to presenting many side effects, fungal resistance has been increasing in recent years. As a result, the search for new therapeutic agents has advanced with the use of new technologies such as nanoparticles (NPs).
View Article and Find Full Text PDFUltrasensitive colorimetric detection of deoxynivalenol in infant milk powder based on the inhibitory effect of silver ions on the peroxidase-like activity of Ni@Pt nanoparticles.
Food Chem
January 2025
CAS Key Laboratory of Nutrition, Metabolism and Food Safety, Shanghai Institute of Nutrition and Health, University of Chinese Academy of Sciences, Chinese Academy of Sciences, Shanghai 200031, China. Electronic address:
Deoxynivalenol, a hazardous mycotoxin, poses significant health risks to humans and animals, necessitating highly sensitive detection methods due to its low abundance in food. Herein, we present a colorimetric sensing strategy for deoxynivalenol detection based on the inhibitory effect of silver ions on the peroxidase-like activity of Ni@Pt nanoparticles. Silver ions adsorb onto the surface of Ni@Pt nanoparticles, blocking the active site and consequently impeding their catalytic activity.
View Article and Find Full Text PDFA 2024 Update on US FDA Implementation of Partial Area Under the Curve Into Bioavailability and Bioequivalence Assessments.
Clin Pharmacol Ther
January 2025
Office of Research and Standards, Office of Generic Drugs, Center for Drug Evaluation and Research, US Food and Drug Administration, Silver Spring, Maryland, USA.
Comparisons of maximum drug concentration (C) and total area under the concentration vs. time curve (AUC) may be inadequate for bioavailability (BA)/bioequivalence (BE) assessments in cases where the shape of the pharmacokinetic (PK) profile of a drug impacts the clinical performance. In such cases, partial area under the concentration vs.
View Article and Find Full Text PDFBoosting Energy Harvesting Performance in Piezoelectric Composites with Aligned Porosity via a Dual Structure Design Strategy.
ACS Appl Mater Interfaces
January 2025
State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083, China.
Porous piezoelectric materials have attracted much interest in the fields of sensing and energy harvesting owing to their low dielectric constant, high piezoelectric voltage coefficient, and energy harvesting figure of merit. However, the introduction of porosity can decrease the piezoelectric coefficient, which restricts the enhancement of output current and power density. Herein, to overcome these challenges, an array-structured piezoelectric composite energy harvester with aligned porosity was constructed via a dual structure design strategy to enhance the output current and power density.
View Article and Find Full Text PDFImproved properties of hybrid Al-CNTs via h-BNs coated with ag and ni for ball bearings.
Sci Rep
January 2025
Production Technology Department, Faculty of Technology and Education, Beni-Suef University, Beni-Suef, 62521, Egypt.
Ball bearings face numerous challenges under harsh operating conditions of elevated pressure between the balls and other contacting parts of the bearing like drop in tribological properties. To address these challenges, this paper presents the first successful experimental investigation of incorporating an innovative hexagonal boron nitride (h-BN) into Aluminum-Carbon nanotube (Al-0.6 wt% CNTs) nanocomposites.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!