This manuscript investigates the influence of the chemical activation step order and process parameters on the specific capacitance of activated carbon derived from rice husk. The chemical activation was performed either before or after the carbonization step, using phosphoric acid (HPO) and potassium hydroxide (KOH) as activating agents. For activation before carbonization, the carbonization process was conducted at various temperatures (600, 750, 850, and 1050 °C). On the other hand, for activation after carbonization, the effect of the volume of the chemical agent solution was studied, with 0, 6, 18, 21, 24, and 30 mL/g of phosphoric acid and 0, 18, 30, 45, 60, and 90 mL/g of 3.0 M KOH solution. The results revealed that in the case of chemical activation before carbonization, the optimum temperature for maximizing specific capacitance was determined to be 900 °C. Conversely, in the case of chemical activation after carbonization, the optimal volumes of the chemical agent solutions were found to be 30 mL/g for phosphoric acid (HPO) and 21 mL/g for potassium hydroxide (KOH). Moreover, it was observed that utilizing phosphoric acid treatment before the carbonization step leads to an 21% increase in specific capacitance, attributed to the retention of inorganic compounds, particularly silica (SiO). Conversely, when rice husks were treated with KOH after the carbonization step, the specific capacitance was found to be doubled compared to treatment with KOH prior to the carbonization step due to embedding of SiO and KHCO inorganic constituents. This study provides valuable insights into the optimization of the chemical activation step order and process parameters for enhanced specific capacitance in rice husk-derived activated carbon. These findings contribute to the development of high-performance supercapacitors using rice husk as a sustainable and cost-effective precursor material.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10794207PMC
http://dx.doi.org/10.1038/s41598-023-49675-0DOI Listing

Publication Analysis

Top Keywords

specific capacitance
24
phosphoric acid
20
chemical activation
20
carbonization step
16
activation carbonization
16
activated carbon
12
potassium hydroxide
12
carbonization
9
capacitance rice
8
rice husk-derived
8

Similar Publications

Human-machine interfaces and wearable electronics, as fundamentals to achieve human-machine interactions, are becoming increasingly essential in the era of the Internet of Things. However, contemporary wearable sensors based on resistive and capacitive mechanisms demand an external power, impeding them from extensive and diverse deployment. Herein, a smart wearable system is developed encompassing five arch-structured self-powered triboelectric sensors, a five-channel data acquisition unit to collect finger bending signals, and an artificial intelligence (AI) methodology, specifically a long short-term memory (LSTM) network, to recognize signal patterns.

View Article and Find Full Text PDF

Calibration and Performance Evaluation of Cost-Effective Capacitive Moisture Sensor in Slope Model Experiments.

Sensors (Basel)

December 2024

Graduate School of Information Science and Electrical Engineering, Kyushu University, Fukuoka 819-0395, Japan.

Understanding the factors that contribute to slope failures, such as soil saturation, is essential for mitigating rainfall-induced landslides. Cost-effective capacitive soil moisture sensors have the potential to be widely implemented across multiple sites for landslide early warning systems. However, these sensors need to be calibrated for specific applications to ensure high accuracy in readings.

View Article and Find Full Text PDF

Weather and soil water dictate farm operations such as irrigation scheduling. Low-cost and open-source agricultural monitoring stations are an emerging alternative to commercially available monitoring stations because they are often built from components using open-source, do-it-yourself (DIY) platforms and technologies. For irrigation management in an experimental vineyard located in Quiroga (Lugo, Spain), we faced the challenge of installing a low-cost environmental and soil parameter monitoring station composed of several nodes measuring air temperature and relative humidity, soil temperature, soil matric potential, and soil water content.

View Article and Find Full Text PDF

With the increasing societal demand for sustainable and renewable energy, supercapacitors have become research hotspots. Transition metal oxides, due to their high capacitance and abundant resources, are the preferred electrode materials. However, their poor conductivity and volume changes limit performance enhancement.

View Article and Find Full Text PDF

Study on the Synthesis and Electrochemical Properties of Nitrogen-Doped Graphene Quantum Dots.

Materials (Basel)

December 2024

Shandong Jinhong New Material Co. Ltd., Weifang 262100, China.

Nitrogen-doped graphene quantum dots (N-GQDs) are widely used in biosensing, catalysis, and energy storage due to their excellent conductivity, high specific surface area, unique quantum size effects, and optical properties. In this paper, we successfully synthesized N-GQDs using a facile hydrothermal approach and investigated the effects of different hydrothermal temperatures and times on the morphology and structure of N-GQDs. The results indicated that the size of N-GQDs gradually increased and they eventually aggregated into graphene fragments with increasing temperature or reaction time.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!