Ammonia (NH) is globally one of the most produced chemicals. Despite being known for its use as a fuel and as a precursor of multiple chemicals, during its production, it is responsible for more than 1.2 % of the total global CO emission and consumes a large amount of energy. In this work, we studied a flow-through membrane-free electrocatalytic device (CMED) to produce continuous stream of NH from a common water contaminant, nitrate (NO ). Indium-palladium (In-Pd) nanoparticles were impregnated in activated carbon cloth (ACC) and used as a cathode in the electrochemical device. It is found that in the counter electrode, adding oxygen evolution reaction (OER) active catalysts like platinum (Pt) for the regeneration of hydrogen ions enhances the rate of ammonia conversion to 7.28 μmol min cm, eliminate the production of toxic nitrite by-products, as well as provide a platform for a stable energy consumption over long periods of time. This method for the conversion of NO into NH promises a way forward for sustainable resource utilization while generating fuel from waste and contributing to future circular economies, and managing the nitrogen cycle in water that is a major challenge of the 21st century society.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/cssc.202301570 | DOI Listing |
Inorg Chem
January 2025
Jiangxi Province Key Laboratory of Nuclear Physics and Technology, East China University of Technology, Nanchang 330013, China.
Recycling waste salt in the dry reprocessing of nuclear fuel and reducing electric energy consumption in the electrorefining process are crucial steps toward addressing significant challenges in this field. The present study proposes a novel approach to purify waste salt by selectively adsorbing excessive fission products using 5A molecular sieves (5A), based on the principles of electrorefining, with the ultimate aim of achieving sustainable development in nuclear fuel. First, Lutetium (Lu)-Bi alloy was synthesized through constant potential electrolysis in the LiCl-KCl-LuCl melt, resulting in a 90.
View Article and Find Full Text PDFMolecules
January 2025
Orlen Unicre a.s., Revolucňí 1521/84, 400 01 Ústí nad Labem, Czech Republic.
The increasing global population and urbanization have led to significant challenges in waste management, particularly concerning vacuum blackwater (VBW), which is the wastewater generated from vacuum toilets. Traditional treatment methods, such as landfilling and composting, often fall short in terms of efficiency and sustainability. Anaerobic digestion (AD) has emerged as a promising alternative, offering benefits such as biogas production and digestate generation.
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
January 2025
Department of Energy Systems Engineering, Faculty of Engineering and Architecture, Burdur Mehmet Akif Ersoy University, 15030, Burdur, Turkey.
In this study, the effect of additives on particulate matter (PM) and flue gas emissions during the co-combustion of poultry waste and pine woodchips in air and oxy-fuel combustion conditions was examined. The appropriate additive for the fuel mixture to reduce PM emissions has been selected by a fast screening method based on thermogravimetric analysis (TGA) in oxygen environment. Among the additives CaHPO, MgCO, MnCO, MgPO, kaolin, CaO, and Zn, the most suitable ones were determined as Zn and MgCO.
View Article and Find Full Text PDFBiomass Convers Biorefin
September 2023
Department of Water Supply, Sanitation and Environmental Engineering, IHE Delft Institute for Water Education, Westvest 7, 2611 AX Delft, the Netherlands.
Faecal sludge (FS) is not extensively evaluated for its potential as a solid fuel mainly due to the general conception of its "highly variable characteristics" in relation to the wide range of on-site sanitation systems. An extensive and systematic FS characterization was therefore conducted on twenty-four samples collected directly from pit latrines, ventilated improved pit latrines (VIPs) and urine-diverting dehydrating toilets (UDDTs) at two depths to understand the impact on properties relevant for combustion. The higher heating value (HHV) for these samples lies between 13 to 22 MJ/kg DM (dry matter).
View Article and Find Full Text PDFWaste Manag
January 2025
Luzhou LaoJiao Co., Ltd, Luzhou 646699 China.
Solid-state fermentation of lignocellulosic waste to produce feed protein is a means of realising solid waste. However, low efficiency and susceptibility to microbial contamination remain significant challenges in feed protein production through room-temperature solid-state fermentation. In this study, thermophilic microbiomes were enriched.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!