Comprehensive Evaluation of Polyaniline-Doped Lignosulfonate in Adsorbing Dye and Heavy Metal Ions.

Lignosulfonate/polyaniline (LS/PANI) nanocomposite adsorbent materials were prepared by the chemical polymerization of lignosulfonate with an aniline monomer as a dopant and structure-directing agent, and the adsorption behavior of dyes as well as heavy metal ions was investigated. LS/PANI composites were used as dye adsorbents for the removal of different cationic dyes (malachite green, methylene blue, and crystal violet). The adsorption behavior of LS/PANI composites as dye adsorbents for malachite green was investigated by examining the effects of the adsorbent dosage, solution pH, initial concentration of dye, adsorption time, and temperature on the adsorption properties of this dye. The following conclusions were obtained. The optimum adsorption conditions for the removal of malachite green dye when LS/PANI composites were used as malachite green dye adsorbents were as follows: an adsorbent dosage of 20 mg, an initial concentration of the dye of 250 mg/L, an adsorption time of 300 min, and a temperature of 358 K. The LS/PANI composite adsorbed malachite green dye in accordance with the Langmuir adsorption model and pseudo-second-order kinetic model, which belongs to chemisorption-based monomolecular adsorption, and the equilibrium adsorption amount was 245.75 mg/g. In particular, the adsorption of heavy metal ion Pb was investigated, and the removal performance was also favorable for Pb.