A staircase-shaped quasi-fractal antenna is presented to meet the requirements of compact electronics operating in UWB or E-UWB spectrum. A conventional broadband monopole antenna is converted into UWB antenna utilizing three iterations of fractal patches. The resultant antenna offers wide impedance bandwidth ranges 2.3-17.8 GHz, having a notch band at 6.1-7.2 GHz. Afterwards, a two-port MIMO antenna is created by placing the second element orthogonally with an edge-to-edge distance of 8.5 mm, that is λ/15 where λ corresponds to free space wavelength at the lowest cut-off frequency. Hereafter, a meandered line-shaped stub is inserted to reduce the mutual coupling between closely spaced MIMO elements to less than -25 dB. As the intended application of the proposed work is On-body, Specific Absorption Rate (SAR) analyses are carried out at 2.4, 5.8 and 8 GHz, showing an acceptable range for both 1-g and 10-g averaged tissues standards. Moreover, various parameters of the MIMO antenna are studied, and a comparison is made between simulated and measured results as well as those of the state of the art.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10772161 | PMC |
| http://dx.doi.org/10.1016/j.heliyon.2023.e23711 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
CMA-Based design of a Novel structure for isolation enhancement and Radiation Pattern correction in MIMO antennas.
Sci Rep
January 2025
Department of Electronic Engineering, Hanyang University, Seoul, 04763, South Korea.
This paper presents novel MIMO microstrip patch antennas with dimensions of 40 × 80 × 1.6 mm³ incorporating a decoupling and pattern correction structure (DPCS) designed to mitigate mutual coupling and radiation pattern distortion, operating within 3.6-3.
View Article and Find Full Text PDF3D highly isolated 6-port tri-band MIMO antenna system with 360° coverage for 5G IoT applications based machine learning verification.
Sci Rep
January 2025
Electrical Engineering Department, King Saud University, 11421, Riyadh, Saudi Arabia.
A multipurpose antenna system that can handle a broad area of frequencies is crucial in the effort to build up widespread 5G Internet-of-Things (IoT) networks. For fifth-generation Internet-of-things applications, this research introduces a new multi-band antenna that can operate in the sub-6 GHz band (2-7 GHz), Ku-band (13-17.5 GHz), and millimeter wave band (25-39 GHz).
View Article and Find Full Text PDFMachine learning-based technique for gain prediction of mm-wave miniaturized 5G MIMO slotted antenna array with high isolation characteristics.
Sci Rep
January 2025
Space Science Centre, Climate Change Institute, Universiti Kebangsaan Malaysia (UKM), 43600, Bangi, Malaysia.
This study presents the design and analysis of a compact 28 GHz MIMO antenna for 5G wireless networks, incorporating simulations, measurements, and machine learning (ML) techniques to optimize its performance. With dimensions of 3.19 λ₀ × 3.
View Article and Find Full Text PDF2 × 2 MIMO dual-wideband ground radiation antenna with a T-shaped isolator for Wi-Fi 6/6E/7 applications.
Sci Rep
January 2025
Department of Electronic Engineering, Hanyang University, Seoul, 04763, South Korea.
In this paper, a miniaturized 2 × 2 MIMO dual-wideband ground radiation antenna targeting Wi-Fi 6/6E/7 standards using 2.4 GHz, 5 GHz, and 6 GHz frequency bands with sufficient antenna performance was designed. The proposed antenna system contains four identical 4 mm × 6 mm antennas of the internal loop type and two identical 6 mm × 6 mm isolators containing lumped LC elements.
View Article and Find Full Text PDFMachine learning-based novel-shaped THz MIMO antenna with a slotted ground plane for future 6G applications.
Sci Rep
December 2024
EIAS Data Science Lab, College of Computer and Information Sciences, Prince Sultan University, Riyadh, 11586, Saudi Arabia.
This study discusses the results of using a regression machine learning technique to improve the performance of 6G applications that use multiple-input multiple-output (MIMO) antennas operating at the terahertz (THz) frequency band. This research evaluates an antenna's performance using various methodologies, such as simulation and RLC equivalent circuit models. The suggested design has a broad bandwidth of 2.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!