This study was conducted to analyze the drying kinetics of carrot slices in electrohydrodynamic (EHD) dryer at different electrode distances. Higher drying rate was observed up to about 70% (w.b.) moisture content, which has been noted as first falling rate period. The time taken to dry the carrot slices to the safe moisture content of 2.5% (wb) was about 9, 8.5 and 6.8 h at a distance of 7, 5 and 3 cm respectively. Five empirical models, Page Model, Newton model, Henderson and Pabis model, logarithmic model and two term model, were tested for the best fit. The drying rate constant (k) increased in all the empirical models as the distance between the electrode decreased. For 7 cm electrode distance, the Page model fitted best whereas the Logarithmic model was found to be the best fit for 5 and 3 cm electrode distance. There is no significant difference found in shrinkage of dried carrot slices at different electrode distance. Rehydration ratio increased as the distance between electrodes decreased. Moisture diffusivity increased as the distance between the electrode decreased. No significant difference in colour, β-carotene and sensory attributes were found between fresh and EHD dried carrot slices at 3 cm electrode distance. Specific energy consumption was significantly influenced by the electrode distance.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10771403 | PMC |
http://dx.doi.org/10.1007/s13197-023-05829-6 | DOI Listing |
Dalton Trans
January 2025
School of Materials Science and Chemical Engineering, Harbin University of Science and Technology, Harbin, 150080, China.
In this work, we successfully prepared four POM-based organic-inorganic hybrids, namely, [(CHN)(CHN)][PMoO] (1), [(CHN)(CHN)][PMoO] (2), [(CHN)][PMoO]·4HO (3), and [(CHN)][PMoO] (4) (where CHN = pyridine, CHN = pyrazine, CHN = 2,7-diamino-1,3,4,6,8,9-hexaazaspiro[4.4] nonane, and CHN = 3-amino-1,2,4-triazole), using a hydrothermal method. Compounds 1 and 2 exhibited a lamellar three-dimensional structure.
View Article and Find Full Text PDFSci Rep
January 2025
Nanomaterials Science Research Laboratory, Chemistry Department, Faculty of Science, Beni-Suef University, Beni-Suef, Egypt.
The design and fabrication of novel electrodes with strong electrochemical responses are crucial in advanced supercapacitor technology. In this study, a poly(m-toluidine)/silver-silver oxide (PMT/Ag-AgO) nanocomposite was prepared using the photopolymerization method. Various characterization techniques were employed to analyze the prepared nanomaterials.
View Article and Find Full Text PDFJ Vis Exp
January 2025
School of Acupuncture-Moxibustion and Tuina, Beijing University of Chinese Medicine;
Electroacupuncture (EA) is one of the most commonly used methods in acupuncture and has a good effect on pain, depression, sensory movement disorders, and other diseases. The effectiveness of EA is influenced by many factors, such as the accuracy of acupoint selection, the duration and course of EA treatment, and EA parameters. However, it has rarely been discussed whether the positive and negative electrodes of the EA instrument with acupoints at different locations and distances have an effect on the curative effect.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
Departament de Química, Universitat Autònoma de Barcelona, 08193 Bellaterra, Catalonia, Spain.
Three different cathodic materials for the hydrogen evolution reaction (HER) consisting of Ru nanoparticles (NPs) supported onto a bare and two doped reduced graphene oxides (r-GO) have been studied. Ru NPs have been synthesized in situ by means of the organometallic approach in the presence of each reduced graphene support (bare (rGO), N-doped (NH-rGO) and P-doped (P-rGO)). (HR)TEM, EDX, EA, ICP-OES, XPS, Raman and NMR techniques have been used to fully characterize the obtained rGO-supported Ru materials.
View Article and Find Full Text PDFTissue Eng Regen Med
January 2025
College of Materials Science and Engineering, Hunan University, Changsha, 410072, People's Republic of China.
Background: Tissue engineering holds promise for vascular repair and regeneration by mimicking the extracellular matrix of blood vessels. However, achieving a functional and thick vascular wall with aligned fiber architecture by electrospinning remains a significant challenge.
Methods: A novel electrospinning setup was developed that utilizes an auxiliary electrode and a spring.
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!