The kinetics knowledge of lignocellulosic biomass decomposition is essential to develop efficient thermochemical conversion technology. However, the simplification of reaction mechanisms in existing oxidative pyrolysis studies largely compromises the application of kinetic models. To explore more exact kinetic parameters and reaction mechanism of lignocellulosic biomass oxidative pyrolysis, an updated oxidative pyrolysis kinetic model (seven-step reaction combined kinetics model) coupled with an optimization algorithm is proposed. Based on a series of thermogravimetric experiments in an air atmosphere, the extra oxidative pyrolysis kinetic parameters are obtained by the Shuffled Complex Evolution method. The proposed kinetic model is validated based on the degradation process of each component (hemicellulose, cellulose, and lignin). Furthermore, the obtained kinetic parameters are applied to predict the oxidative pyrolysis behavior, and the predicted mass loss rate is in good agreement with the experimental data. Eventually, according to the key combined kinetics parameters, it is found that the oxidative pyrolysis mechanisms of hemicellulose, cellulose, and lignin correspond to the power law, nucleation & growth, and chemical reaction order, respectively, while the combustion of char corresponds to the reaction order mechanism.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jenvman.2024.120055 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Portable paper-based microfluidic devices based on CuS@AgS nanocomposites for colorimetric/electrochemical dual-mode detection of dopamine.
Biosens Bioelectron
January 2025
Centre for Advanced Optoelectronic Functional Materials Research and Key Laboratory of UV Light-Emitting Materials and Technology of Ministry of Education, Northeast Normal University, 130024, Changchun, China. Electronic address:
The development of integrated multiple signal outputs within a single platform is highly significant for efficient and accurate on-site biomarker detection. Herein, colorimetric/electrochemical dual-mode microfluidic paper-based analytical devices (μPADs) were designed for portable, visual and accurate dopamine (DA) detection. The dual-mode μPADs, featuring folded structure, integrate a colorimetric layer and an electrochemical layer using wax printing and laser-induced graphene (LIG) pyrolysis techniques, allowing the vertical flow of analyte solution.
View Article and Find Full Text PDFDesign of bifunctional nitrogen-doped biochar with adsorption and catalytic oxidation capabilities for enhanced toluene emission control.
Environ Res
January 2025
Department of Environmental Engineering, Chungbuk National University, Cheongju, Chungbuk 28644, Republic of Korea. Electronic address:
Volatile organic compounds (VOCs), such as toluene, are hazardous air pollutants that pose significant health and environmental risks. This study addresses remediation of toluene by developing a bifunctional nitrogen-doped biochar (NDB) activated with sodium hydroxide (NaOH), aimed at reducing toluene emissions through both adsorption and catalytic oxidation. A series of NDB samples were prepared via NaOH activation and pyrolysis at varying temperatures to optimize their adsorption capacity and catalytic performance.
View Article and Find Full Text PDFLaser-Induced Graphene for Electrochemical Sensing of Antioxidants in Biodiesel.
ACS Omega
January 2025
Institute of Chemistry, UFU, Federal University of Uberlândia, Uberlândia, Minas Gerais 38400-902, Brazil.
Synthetic antioxidants are often introduced to biodiesel to increase its oxidative stability, and -butyl hydroquinone (TBHQ) has been selected due to its high efficiency for this purpose. The monitoring of antioxidants in biodiesel therefore provides information on the oxidative stability of biodiesels. Herein, a laser-induced graphene (LIG) electrode is introduced as a new sensor for detecting -butyl hydroquinone (TBHQ) in biodiesel samples.
View Article and Find Full Text PDFCarbon-doped bimetallic oxide nanoflakes for simultaneous electrochemical analysis of ascorbic acid, uric acid, and acetaminophen in sweat.
Anal Methods
January 2025
Shanghai Key Laboratory of Functional Materials Chemistry, School of Chemistry and Molecular Engineering, East China University of Science and Technology, Shanghai, 200237, People's Republic of China.
Non-invasive continuous detection using tears or sweat as substitutes for blood samples has become an emerging method for real-time monitoring of human health. However, its development is limited by the low sample volume and low level of analytes. The simultaneous determination of multi-analytes with highly sensitive electrochemical sensing platforms has undoubtedly resulted in breakthrough innovations.
View Article and Find Full Text PDFHierarchical Selenium-Doped Nickel-Cobalt Hybrids on Carbon Paper for the Overall Water-Splitting Electrocatalytic System.
ACS Appl Mater Interfaces
January 2025
Department of Battery and Chemical Engineering, Hanyang University, Ansan, Gyeonggi-do 15588, Republic of Korea.
Designing and constructing hierarchically structured materials with heterogeneous compositions is the key to developing an effective catalyst for overall water-splitting applications. Herein, we report the fabrication of hollow-structured selenium-doped nickel-cobalt hybrids on carbon paper as a self-supported electrode (denoted as Se-Ni|Co/CP, where Ni|Co hybrids consist of nickel-cobalt alloy-incorporated nickel-cobalt oxide). The procedure involves direct growth of zeolitic imidazolate framework-67 (ZIF-67) on bimetal-based nickel-cobalt hydroxide (NiCoOH) electrodeposited on CP, followed by selenous etching and pyrolysis to obtain the final Se-Ni|Co/CP electrocatalytic system.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!