Study of the effectiveness of a presoaking process for reducing the additives migration from babies toys.

This research aims to study a process of steeping in the n-heptane, used for reducing the migration of additives contained initially in toys for babies plasticized with di-octylphtalate (DOP) based on poly (vinyl chloride) (PVC) and stabilized with epoxidized sunflower oil (ESO). Two formulations were carried out at different levels of DOP plasticizers (15% and 45%). The migration tests were conducted in the synthetic saliva in the absence and in the presence of α-amylase with or without agitation at 37° C for 1, 3, and 6 h. The migration phenomenon was studied on the basis of preliminary studies based on the mass variation of the two formulations and where the physico-chemical technical analysis: Fourier-transform infrared spectroscopy (FTIR) and gas chromatography coupled with gas chromatography-mass spectrometry (GC-MS) were performed. This work shows that the presoak method can be used successfully to reduce the migration phenomenon of the additives and to decrease the interactions between the PVC samples and the saliva stimulant. This treatment has allowed a notable decrease of the overall migration of all the additives from saliva. It is noted that the high pH value (7.17) was obtained with the F45% formulation under agitation and in the presence of α-amylase, a mass loss of the order of 0.9004 and a minimum DOP concentration of 0.024 ppm. The analysis by GC-MS provided the DOP chromatograms of the control and the specimens, which have undergone migration tests and treatments. In addition, the amount of DOP, migrated in the case of the F15% and F45%, controls the formulations and was greater than those of the presoaked formulations, which have indicated the efficiency of the applied process. This study shows that migration has taken place, and that the soaking treatment has reduced the migration of all the additives present in the PVC samples.