Automated Quantification of Interlaminar Delaminations in Carbon-Fiber-Reinforced Polymers via High-Resolution Ultrasonic Testing.

This article presents a method of ultrasonic testing (UT) that detects and quantifies interlaminar delaminations in CFRP composites with high resolution in terms of both spatial resolution in the planar dimension and depth into the laminate. Unidirectional and woven CFRP laminates were fabricated for this study, with a PTFE film inserted at various depths throughout the laminate to act as intentional crack initiation sites. All samples were mechanically tested via a three-point, end-notched flexure (ENF) test, followed by a quantification of the extent of the induced interlaminar delaminations using UT and X-ray computed tomography (CT). UT analysis for unidirectional CFRP samples was able to show a clear contrast between the delaminated area and the non-delaminated area. UT analysis of the woven CFRP samples yielded comparable results but required finer tuning of analysis parameters due to the interlocking woven fabric. CT results revealed a significant contrast between the crack and composite; thus, fine geometrical features of the crack front could be observed. UT and CT measurements were then compared, revealing an average difference of 1.09% in the delamination area, with UT overestimating as compared to CT. A UT depth study was also performed to automatically locate the interlaminar delamination at different depths throughout the components, with the delamination being predicted within one lamina interface for all samples. These results demonstrate UT's ability to accurately detect and quantify the extent and location of interlaminar delaminations due to bending.