AI Article Synopsis
- The study investigates the mechanical properties of arc wire thermal spray coatings, focusing on their strength under static and dynamic loading conditions.
- Tests revealed that the coatings exhibit strain rate sensitivity, with significant reductions in porosity (90% for static, 86% for dynamic loading) leading to increased microhardness (160 HV and 278 HV respectively).
- The findings highlight the coatings' ability to maintain cohesion while effectively absorbing mechanical energy, showcasing their potential for enhanced performance in various applications.
Article Abstract
This paper presents the mechanical behavior of thermally sprayed coatings produced using an arc wire coating material. The produced coatings were cut and subjected to strength resistance tests in static and in dynamic loading. The compressive behavior for the strain rates between 0.001 1/s and 2612 1/s was examined. The strain rate sensitivity of the material was recognized in the material during dynamic loading using the SHPB technique. Microstructural observations were made, and properties such as changes in porosity and the microhardness of the coatings tested were examined. A significant reduction in coating porosity was demonstrated after static loading (90%) and dynamic loading (86%). The result of porosity reduction is the strengthening of the coatings through an increase in the microhardness of these coatings after loading in the static test (160 HV 0.3/8) and the dynamic test (278 HV 0.3/8). As a result of the tests, the coatings retain their cohesion and remain consistent. At the same time, they can absorb a significant amount of mechanical energy due to plastic deformation and porosity reduction. The presented results concern a completely new coating material created from a core wire.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10744655 | PMC |
| http://dx.doi.org/10.3390/ma16247566 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Investigation of the mechanical characteristics of porcine brain tissue in complex environments.
Acta Bioeng Biomech
June 2024
1School of Health Science and Engineering, University of Shanghai for Science and Technology, Shanghai, China.
: Brain tissue immersed in cerebrospinal fluid often exhibits complex mechanical behaviour, especially the nonlinear stress- strain and rate-dependent responses. Despite extensive research into its material properties, the impact of solution environments on the mechanical behaviour of brain tissue remains limited. This knowledge gap affects the biofidelity of head modelling.
View Article and Find Full Text PDFHighly deformable flapping membrane wings suppress the leading edge vortex in hover to perform better.
Proc Natl Acad Sci U S A
February 2025
École polytechnique fédérale de Lausanne, School of Engineering, Institute of Mechanical Engineering, Unsteady Flow Diagnostics Laboratory, Lausanne 1015, Switzerland.
Airborne insects generate a leading edge vortex when they flap their wings. This coherent vortex is a low-pressure region that enhances the lift of flapping wings compared to fixed wings. Insect wings are thin membranes strengthened by a system of veins that does not allow large wing deformations.
View Article and Find Full Text PDFTriethylamine-mediated protonation-deprotonation unlocks dual-drug self assembly to suppress breast cancer progression and metastasis.
Proc Natl Acad Sci U S A
February 2025
Key Laboratory of Drug-Targeting and Drug Delivery System of the Education Ministry and Sichuan Province, Sichuan Engineering Laboratory for Plant-Sourced Drug and Sichuan Research Center for Drug Precision Industrial Technology, West China School of Pharmacy, Sichuan University, Chengdu 610041, People's Republic of China.
Carrier-free nanomedicines exhibited significant potential in elevating drug efficacy and safety for tumor management, yet their self assembly typically relied on chemical modifications of drugs or the incorporation of surfactants, thereby compromising the drug's inherent pharmacological activity. To address this challenge, we proposed a triethylamine (TEA)-mediated protonation-deprotonation strategy that enabled the adjustable-proportion self assembly of dual drugs without chemical modification, achieving nearly 100% drug loading capacity. Molecular dynamic simulations, supported by experiment evidence, elucidated the underlying self-assembly mechanism.
View Article and Find Full Text PDFLarge-Area Conductor-Loaded PDMS Flexible Composites for Wireless and Chipless Electromagnetic Multiplexed Temperature Sensors.
Adv Sci (Weinh)
January 2025
James Watt School of Engineering, University of Glasgow, Glasgow, G12 8QQ, UK.
Capacitive dielectric temperature sensors based on polydimethylsiloxane (PDMS) loaded with 10 vol% of inexpensive, commercially-available conductive fillers including copper, graphite, and milled carbon fiber (PDMS-CF) powders are reported. The sensors are tested in the range of 20-110 °C and from 0.5 to 200 MHz, with enhanced sensitivity from 20 to 60 °C, and a relative response of 85.
View Article and Find Full Text PDFExploration of the dynamics of otic capsule and intracochlear pressure: Numerical insights with experimental validation.
J Acoust Soc Am
January 2025
Department of Otorhinolaryngology, Head and Neck Surgery, University Hospital Zurich, University of Zurich, Zurich, Switzerland.
The otic capsule and surrounding temporal bone exhibit complex 3D motion influenced by frequency and location of the bone conduction stimulus. The resultant correlation with the intracochlear pressure is not sufficiently understood, thus is the focus of this study, both experimentally and numerically. Experiments were conducted on six temporal bones from three cadaver heads, with BC hearing aid stimulation applied at the mastoid and classical BAHA locations across 0.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!