Metallic titanium (Ti) implant surfaces need improvement for bioproperties and antibacterial behavior. For this purpose, a new boron-doped bioactive apatite-wollastonite (AW) coating was successfully developed on the Ti plate surface. The effects of boron addition on the microstructure, mechanical properties, and bioproperties of the AW coating were investigated. With the addition of boron (B), the AW coating morphology became less porous and compact. In terms of bio properties, the rate of apatite formation increased with the addition of B, and the cell viability rate increased from approximately 66-81%. B addition increased the elastic modulus of the AW coating from about 24-46 GPa and increased its hardness about 2.5 times. In addition, while no antibacterial activity was observed in the AW coating, the addition of boron slightly introduced antibacterial properties. The novel AW/B composite coating obtained is promising for Ti implant surfaces.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/s00775-023-02032-y | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Bioactive apatite-wollastonite glass ceramics coating on metallic titanium for biomedical applications: effect of boron.
J Biol Inorg Chem
February 2024
Department of Metallurgical and Materials Engineering, Faculty of Technology, Sakarya University of Applied Sciences, 54187, Serdivan, Sakarya, Turkey.
Metallic titanium (Ti) implant surfaces need improvement for bioproperties and antibacterial behavior. For this purpose, a new boron-doped bioactive apatite-wollastonite (AW) coating was successfully developed on the Ti plate surface. The effects of boron addition on the microstructure, mechanical properties, and bioproperties of the AW coating were investigated.
View Article and Find Full Text PDFDevelopment of bioactive resin modified glass ionomer cement for dental biomedical applications.
Heliyon
January 2021
PT Swayasa Prakarsa, UGM Science Techno Campus, Division of Drugs, Medical Devices, and Functional Food, Yogyakarta 55571, Indonesia.
It would certainly be an advantage of resin-modified glass ionomer cement (RMGIC) if it can possess bioactivity. However, research related to that is still very limited. Hybridization of RMGIC was predicted to increase mechanical properties and resistance to disintegration, and low content of polyacrylic acid induces cement bioactivity.
View Article and Find Full Text PDFThe use of a bioactive bone cement containing apatite-wollastonite glass-ceramic filler and bisphenol-a-glycidyl methacrylate resin for acetabular fixation in total hip arthroplasty: long-term follow-up results of a clinical trial.
Bone Joint J
July 2019
Department of Orthopaedic Surgery, Kyoto University, Kyoto, Japan.
Aims: In the 1990s, a bioactive bone cement (BABC) containing apatite-wollastonite glass-ceramic (AW-GC) powder and bisphenol-a-glycidyl methacrylate resin was developed at our hospital. In 1996, we used BABC to fix the acetabular component in primary total hip arthroplasty (THA) in 20 patients as part of a clinical trial. The purpose of this study was to investigate the long-term results of primary THA using BABC.
View Article and Find Full Text PDFOsseointegration of porous apatite-wollastonite and poly(lactic acid) composite structures created using 3D printing techniques.
Mater Sci Eng C Mater Biol Appl
September 2018
School of Mechanical and Systems Engineering, Newcastle University, Newcastle upon Tyne NE3 1PS, UK. Electronic address:
A novel apatite-wollastonite/poly(lactic acid) (AW/PLA) composite structure, which matches cortical and cancellous bone properties has been produced and evaluated in vitro and in vivo. The composites structure has been produced using an innovative combination of 3D printed polymer and ceramic macrostructures, thermally bonded to create a hybrid composite structure. In vitro cell assays demonstrated that the AW structure alone, PLA structure alone, and AW/PLA composite were all biocompatible, with the AW structure supporting the proliferation and osteogenic differentiation of rat bone marrow stromal cells.
View Article and Find Full Text PDFSensitivity of novel silicate and borate-based glass structures on bioactivity and degradation behaviour.
Ceram Int
October 2017
School of Mechanical and Systems Engineering, Newcastle University, Claremont Road, Newcastle upon Tyne, UK.
Three novel glass compositions, identified as NCL2 (SiO-based), NCL4 (BO-based) and NCL7 (SiO-based), along with apatite-wollastonite (AW) were processed to form sintered dense pellets, and subsequently evaluated for their bioactive potential, resulting physico-chemical properties and degradation rate. Microstructural analysis showed the carbonated hydroxyapatite (HCA) precipitate morphology following SBF testing to be composition-dependent. AW and the NCL7 formulation exhibited greater HCA precursor formation than the NCL2 and NCL4-derived pellets.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!