Textile wastewater (TWW) is one of the most hazardous wastewaters for ecosystems when it is discharged directly into water streams without adequate treatment. Some organic pollutants, such as dyes in TWW, are considered refractory compounds that are difficult to degrade using conventional chemical and biological methods. The bicarbonate-activated peroxide (BAP) system is an advanced oxidation process (AOP) based on applying HO, which has been demonstrated to be a clean and efficient technology for dye degradation, with the advantage of operating under slightly alkaline pH conditions. In this study, response surface methodology (RSM) based on a central composite design (CCD) was used to optimize the degradation of TWW contaminated with the azo dye Acid Black 194 using the BAP system catalyzed with cobalt ions in solution (Co). The analysis of variance (ANOVA) technique was applied to identify significant variables and their individual and interactive effects on the degradation of TWW. The optimum reagent concentrations for degrading TWW at 25 °C and with 45 μM Co were 787.61 and 183.34 mM for HO and NaHCO, respectively. Under these conditions, complete decolorization (≥99.40), 32.20 % mineralization, and 52.02 % chemical oxygen demand removal were achieved. Additionally, the acute toxicity of textile wastewater before and after oxidation was evaluated with guppy fish (), showing a total reduction in mortality after treatment with the Co-BAP system. The Co-BAP oxidation system is a potential method for textile wastewater treatment, which, in addition to achieving complete decolorization and partial mineralization, improves biodegradability and reduces the toxicity of the treated water.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10724562 | PMC |
http://dx.doi.org/10.1016/j.heliyon.2023.e22444 | DOI Listing |
J Environ Sci Health B
January 2025
Faculty of Food Technology, University of Economics-Technology for Industries (UNETI), Hanoi, Vietnam.
Antibiotic residues have become serious health concerns due to the development of antibiotic-resistant bacteria. The treatment of antibiotic pollutants in wastewater is necessary for reducing the issue of antibiotic resistance. In this work, the metal oxide photocatalyst titanium dioxide (TiO) was evaluated for the removal of the tetracycline antibiotic (TC-A) and the deactivation of bacteria (E-B) from wastewater.
View Article and Find Full Text PDFLett Appl Microbiol
January 2025
Amity Institute of Biotechnology, Amity University Rajasthan, Jaipur 303002, India.
Azo dyes constitute 60-70% of commercially used dyes and are complex, carcinogenic, and mutagenic pollutants that negatively impact soil composition, water bodies, flora, and fauna. Conventional azo dye degradation techniques have drawbacks such as high production and maintenance costs, use of hazardous chemicals, membrane clogging, and sludge generation. Constructed Wetland-Microbial Fuel Cells (CW-MFCs) offer a promising sustainable approach for the bio-electrodegradation of azo dyes from textile wastewater.
View Article and Find Full Text PDFPolymers (Basel)
January 2025
Institute of Textile Auxiliary and Ecological Dyeing Finishing, Nanjing Tech University, 30 South Puzhu Road, Nanjing 211816, China.
A simple and non-chemical binding nanofiber (-CD/PA) adsorbent was obtained by electrospinning a mixture of -cyclodextrin (-CD) and polyacrylate (PA). The cationic dyes in wastewater were removed by the host-guest inclusion complex of the -cyclodextrin and the electrostatic interaction between the polyacrylate and the dyes groups. The influence of the content of -cyclodextrin on the surface morphology and adsorption capacity of the nanofiber membrane was discussed, and the optimized adsorption capacity of nanofiber adsorption material was determined.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
Istanbul Technical University, Faculty of Science and Letters, Department of Chemistry, Soft Materials Research Laboratory, 34469, Maslak, Istanbul, Turkey. Electronic address:
Controllable macromolecular architecture formation via polysaccharide integrated ternary copolymerization was explored in the design of amino-functionalized n-alkyl methacrylate ester-based biohybrids. Ternary poly(dimethylaminoethyl methacrylate-co-glycidyl methacrylate-co-hydroxypropyl methacrylate)/sodium-alginate, PDGH/ALG, hybrids were designed using anionic polysaccharide through in-situ radical polymerization. An insight into the effect of ALG on physicochemical structure of ternary hybrids, particularly the interactions between polymeric chains, was created.
View Article and Find Full Text PDFMembranes (Basel)
January 2025
Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education, School of Energy & Power Engineering, Dalian University of Technology, Dalian 116024, China.
The escalating discharge of textile wastewater with plenty of dye and salt has resulted in serious environmental risks. Membranes assembled from two-dimensional (2D) nanomaterials with many tunable interlayer spacings are promising materials for dye/salt separation. However, the narrow layer spacing and tortuous interlayer transport channels of 2D-material-based membranes limit the processing capacity and the permeability of small salt ions for efficient dye/salt separation.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!