In a nuclear emergency, one of the actions taken for the sake of public is to monitor thyroid exposure to radioiodines. Japan's Nuclear Regulation Authority recently published a report on such monitoring and proposed direct thyroid measurements with conventional NaI(Tl) survey meters (e.g. Hitachi model TCS-172) as a primary screening method. A previous study proposed screening levels (SLs) used in these simplified measurements as the net reading values of the TCS-172 device. Age-specific SLs were derived from a thyroid equivalent dose of 100 mSv due to the inhalation intake of 131I. This study addressed the possible influence of short-lived iodine isotopes other than 131I on the simplified measurements. In preparation for such measurements, the responses of the device for 132I as an ingrowth component from 132Te, 133I, 134I and 135I in the thyroid were evaluated by numerical simulations using age-specific stylized phantoms in addition to those obtained for 131I in the previous study. The radioactivity ratios of the relevant isotopes were taken from the inventory data of the Fukushima Daiichi Nuclear Power Plant. The results were used to predict the net readings of the device when 132Te-132I and 133I as well as 131I were inhaled at 24 or 72 h after the shutdown of a nuclear power plant. In these cases, the signals from 132Te-132I and 133I become undetectable a couple of days after intake, which could lead to underestimations of the thyroid dose. To estimate the thyroid dose accurately from the simplified measurements, it is necessary to identify the exact time of intake after the shutdown and the actual physiochemical property of 132Te that affects the thyroid uptake of 132I.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1093/rpd/ncad304 | DOI Listing |
J Colloid Interface Sci
January 2025
College of Light Industry and Food Engineering, Nanjing Forestry University, Jiangsu Co-Innovation Center for Efficient Processing and Utilization of Forest Resources, Nanjing 210037 China. Electronic address:
Surface-enhanced Raman scattering (SERS) is a highly sensitive technology to detect target analytes. The construction of dynamic "hot-spots" represents a significant approach to enhancing detection sensitivity. Herein, a hybrid plasma platform with dynamic "hot-spots" was developed for SERS recognition based on the assembly of gold nanospheres (AuNSs) on temperature-sensitive bacterial cellulose (BC) film grafted with poly(N-isopropylacrylamide) (PNIPAM).
View Article and Find Full Text PDFSci Total Environ
January 2025
School of Chemical Engineering, Dalian University of Technology, Dalian, Liaoning 116024, China.
Ammonia (NH) holds promise as a carbon-free fuel. Blending it with highly reactive fuels could efficiently alleviate issues such as slow burning rates and narrow flammability ranges. Ethanol (CHOH) offers the advantage of carbon neutrality and has a high-octane rating.
View Article and Find Full Text PDFPolymers (Basel)
January 2025
Department of Advanced Prosthodontics, Institute of Science Tokyo, Tokyo 113-8510, Japan.
Light-polymerizing reline materials offer improved chairside workability compared to conventional auto-polymerizing reline materials, addressing the partial denture (RPD) incompatibility caused by residual ridge resorption owing to long-term use. This study evaluates the fitting accuracy of relined materials by combining conventional fitting tests with three-dimensional (3D) measurements for detailed analysis. Light-polymerizing reline material (HikariLiner, Tokuyama, Tokyo, Japan, LP) and auto-polymerizing material (Rebase III, Tokuyama, AP) were used.
View Article and Find Full Text PDFSensors (Basel)
January 2025
School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu 611731, China.
Lithium-ion batteries represent a significant component of the field of energy storage, with a diverse range of applications in consumer electronics, portable devices, and numerous other fields. In view of the growing concerns about the safety of batteries, it is of the utmost importance to develop a sensor that is capable of accurately monitoring the internal temperature of lithium-ion batteries. External sensors are subject to the necessity for additional space and ancillary equipment.
View Article and Find Full Text PDFSensors (Basel)
January 2025
Department of Aeronautical and Automotive Engineering, Loughborough University, Loughborough LE11 3TU, UK.
Sensor selection is a vital part of Wireless Sensor Network (WSN) management. This becomes of increased importance when considering the use of low-cost, bearing-only sensor nodes for the tracking of Unmanned Aerial Vehicles (UAVs). However, traditional techniques commonly form excessively large sensor clusters, which result in the collection of redundant information, which can deteriorate performance while also increasing the associated network costs.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!