This study aims to evaluate the effect of pre-reconstruction process for low tube voltage computed tomography (CT) on image quality of filtered back projection (FBP) reconstruction. Small and large quality assurance water phantoms (19 and 33 cm diameter) were scanned on a third-generation dual-source CT with 70 kVp and 120 kVp at various dose levels. Image quality was assessed in terms of the noise power spectrum (NPS) and task-based transfer function (TTF). NPSs and TTFs in the small phantom were comparable between 70 and 120 kVp protocols. In the large phantom, the curves of the NPS changed and the TTF decreased even at the high-dose levels for 70 kVp protocol compared to 120 kVp protocol. Our results indicated that the pre-reconstruction process is performed in low tube voltage CT for large objects even for the FBP reconstruction and has an effect on the image quality.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/s12194-023-00764-9 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fusion of Visible and Infrared Aerial Images from Uncalibrated Sensors Using Wavelet Decomposition and Deep Learning.
Sensors (Basel)
December 2024
Department of Electrical and Computer Engineering, University of Missouri, Columbia, MO 65211, USA.
Multi-modal systems extract information about the environment using specialized sensors that are optimized based on the wavelength of the phenomenology and material interactions. To maximize the entropy, complementary systems operating in regions of non-overlapping wavelengths are optimal. VIS-IR (Visible-Infrared) systems have been at the forefront of multi-modal fusion research and are used extensively to represent information in all-day all-weather applications.
View Article and Find Full Text PDFOptimizing Correction Factors on Color Differences for Automotive Painting Services.
Sensors (Basel)
December 2024
Department of Management and Industrial Engineering, University of Petrosani, 332003 Petrosani, Romania.
Currently, the automotive sector is showing increased demands regarding the color of cars in general, but especially the quality and the time of painting, in particular. Companies working in this industry, especially in specialized painting services, must perform work of impeccable quality in the shortest possible time in order to be efficient. Color differences that appear in different areas of the car result from the use of different formulas for obtaining color.
View Article and Find Full Text PDFA WSN and LoRa Hybrid Multimedia Transmission Protocol for Scalar Data and Image Transmission.
Sensors (Basel)
December 2024
Ubicom Laboratory, Department of Electrical, Electronic and Computer Engineering, University of Ulsan, Ulsan 44610, Republic of Korea.
The proposed protocol features reliable and fast image transmission while periodically transmitting scalar data without interruption by allowing two networks, a LoRa network and a wireless sensor network, with different transmission characteristics to cooperate. It adopts the RT-LoRa protocol for periodic scalar data transmission and uses a WSN-based pipelined transmission method that leverages single-hop message transmission of a LoRa network for image transmission. Thus, it can not only eliminate the control message overhead for time synchronization, slot scheduling, and path establishment for pipelined image transmission in WSNs but also eliminate interferences within WSNs, such as data collisions and data and message collisions, during pipelined image transmission, thereby enabling high reliability and fast transmission.
View Article and Find Full Text PDFComprehensive Improvement of Binocular Structured Light Calibration Method Based on Radical-Conservative Cooperative Particle Swarm.
Sensors (Basel)
December 2024
Faculty of Engineering and IT, University of Technology Sydney, Sydney 2052, Australia.
To achieve high-precision 3D reconstruction, a comprehensive improvement has been made to the binocular structured light calibration method. During the calibration process, the calibration object's imaging quality and the camera parameters' nonlinear optimization effect directly affect the caibration accuracy. Firstly, to address the issue of poor imaging quality of the calibration object under tilted conditions, a pixel-level adaptive fill light method was designed using the programmable light intensity feature of the structured light projector, allowing the calibration object to receive uniform lighting and thus improve the quality of the captured images.
View Article and Find Full Text PDFSelf-Supervised and Zero-Shot Learning in Multi-Modal Raman Light Sheet Microscopy.
Sensors (Basel)
December 2024
CeMOS Research and Transfer Center, Mannheim University of Applied Sciences, 68163 Mannheim, Germany.
Advancements in Raman light sheet microscopy have provided a powerful, non-invasive, marker-free method for imaging complex 3D biological structures, such as cell cultures and spheroids. By combining 3D tomograms made by Rayleigh scattering, Raman scattering, and fluorescence detection, this modality captures complementary spatial and molecular data, critical for biomedical research, histology, and drug discovery. Despite its capabilities, Raman light sheet microscopy faces inherent limitations, including low signal intensity, high noise levels, and restricted spatial resolution, which impede the visualization of fine subcellular structures.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!