Treadmill-based system for postural studies: Design and validation.

Computer-controlled treadmills are common in many gait labs and offer great potential for conducting perturbation-based postural studies. However, the time-course of these disturbances can be too brief to be controlled manually through product software. Here we present a system that combines a Bertec® split-belt treadmill with custom hardware and software to deliver postural disturbances during standing and record data from multiple sources simultaneously. We used this system to administer to 15 healthy participants an 8-session perturbation-based training protocol in which they learned to respond without stepping to progressively larger perturbations. Kinematic, electromyographic, and force data were collected throughout. Motion capture was used to characterize the accuracy and repeatability of the treadmill-delivered perturbations with respect to duration, displacement, and peak velocity. These (observed) data were compared to that expected based on software commands and the known constraints of the treadmill (i.e., 10 Hz operating speed). We found perturbation durations to be as expected. Peak velocities and displacements were slightly higher than expected (average increases were 0.59 cm/s and 1.76 cm, respectively). Because this increase in magnitude was consistent, it did not impede training or affect data analysis. Treadmill behavior was repeatable across 95 % of trials.