The aqueous batch extraction of pectin from unripe Ponkan mandarin was evaluated for potential application in the food industry. A small central composite design with 4 variables (temperature, volume to mass ratio, pH, and mean particle size) and 3 levels was applied for pectin extraction optimization. Also, the kinetic of the pectin yield extraction was investigated at temperatures 70-90 °C, stirring rate of 100-700 rpm, ultrasound pretreatment system, and modeling using four mathematical models. The pectin extraction process was evaluated by yield of pectin and esterification degree. FTIR, TGA, and DTA were performed to evaluate the quality of pectin obtained. The small central composite design demonstrated that temperature and volume to mass ratio were significant variables, and the highest yield of pectin extraction was 11.62 % obtained at temperature and volume to molar ratio of 81.9 °C and 33.9 v/w %, respectively. Besides, the esterification degree showed higher than 70 % for all extraction conditions, suggesting high methoxyl pectin. The kinetics showed the stirring rate and the ultrasound pretreatment did not cause any significant alteration, while high temperatures proved to be beneficial to the rate and the yield of the pectin extraction. The best fit was provided by Fick's law, suggesting the extraction process is limited by internal mass transfer. FTIR showed the functional groups expected for pectin, and TGA and DTA indicated that the pectin obtained is proper for most food products, as only above 200 °C the pectin should degrade.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.ijbiomac.2023.128663 | DOI Listing |
J Food Sci Technol
January 2025
Department of Grain Science and Technology, CSIR-Central Food Technological Research Institute, Mysuru, 570020 India.
Unlabelled: The potential of (), an underutilized plant rich in medicinal and nutritional value, for producing ready-to-serve (RTS) beverages was explored. The research investigated commercial processing techniques for extracting fruit juice and the impact of stabilizers such as pectin (low and high), xanthan gum, and sodium alginate on beverage quality. Sodium alginate, chosen for its sedimentation rate and sensory acceptability, was further optimized in RTS formulations.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
Department of Food Engineering and Technology, Sant Longowal Institute of Engineering and Technology (SLIET), Longowal, 148106 Sangrur, Punjab, India. Electronic address:
In the present investigation, the formulation and thorough assessment of biodegradable composite films were conducted, utilizing pectin extracted from banana peel in conjunction with synthesized silver zeolite nanoparticles. The evaluation of physical properties, microstructural investigation, mechanical characteristics, and barrier properties was done providing valuable insights into various attributes of the film. The amalgamation of silver zeolite nanoparticles with the extracted pectin from banana peel results in biodegradable composite films exhibiting distinct physical, mechanical, barrier, and thermal properties.
View Article and Find Full Text PDFMolecules
January 2025
Institute of Vine and Wine Sciences, ICVV (University of La Rioja, Government of La Rioja and CSIC), Finca La Grajera, 26007 Logroño, Spain.
The recovery of polysaccharides (PS) from red grape marc and white grape pomace by enzymatic degradation of their cell walls is an interesting green extraction technique that preserves the structure and bioactivity of PS. The type and dose of enzyme, and the liquid/solid (L/S) ratio in PS extraction were studied using four commercial enzymes. Four different doses per enzyme were used, with tartaric acid as solvent and L/S ratios of 1.
View Article and Find Full Text PDFFront Chem
January 2025
Departamento de Industrias, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Buenos Aires, Argentina.
The use of green solvents, citric acid (CA), and natural deep eutectic solvents (NADES) for the obtention of pectin from wastes (pulp and peel) of was studied. The NADES used comprised citric acid-glucose-water (N1) or lactic acid-glucose-water (N2). The fractions rich in pectin obtained after exposure to NADES showed lower yield (≈4 g/100 g CA vs.
View Article and Find Full Text PDFACS Omega
January 2025
Precision Livestock and Nutrition Unit, Gembloux Agro-Bio Tech, TERRA Teaching and Research Centre, Liège University, Passage des Déportés 2, Gembloux 4000, Belgium.
Pectin is an acidic heteropolysaccharide, a natural high molecular weight compound primarily found in higher plants. It consists of four major structural domains: homogalacturonan (HG), rhamnogalacturonan II (RG-II), rhamnogalacturonan I (RG-I), and xylogalacturonan (XGA). Various methods are currently employed for pectin extraction, including acid extraction, microbial fermentation, microwave-assisted extraction, and ion extraction, each with unique advantages and disadvantages.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!