Measurements of variable capacitance using single port radio frequency reflectometry.

A radio frequency (RF) reflectometry technique is presented to measure device capacitances using a probe station. This technique is used to characterize micro-electromechanical system (MEMS) variable capacitor devices that can be connected to create pull-up and pull-down networks used in digital gates for reversible computing. Adiabatic reversible computing is a promising approach to energy-efficient computing that can dramatically reduce heat dissipation by switching circuits at speeds below their RC time constants, introducing a trade-off between energy and speed. The variable capacitors in this study will be measured using single port RF reflectometry achieved with a custom-made RF probe. The RF probe consists of a micromanipulator with an on-board matching network and is calibrated by measuring a capacitive bank that shows a clearly visible frequency shift with the increase in capacitance. The RF probe worked well when measuring static capacitors with no parasitic resistance; however, the frequency shift is masked when measuring the MEMS variable capacitors due to their high in-series parasitic resistance (around 80 kΩ). Therefore, RF reflectometry has the potential to measure MEMS variable capacitors in the range of 0-30 fF when not masked by a high in-series parasitic resistance, creating a fast and versatile method for characterizing variable capacitors that can be used in energy-efficient computing.