Lithium-sulfur batteries with high capacity are considered the most promising candidates for next-generation energy storage systems. Mitigating the shuttle reaction and promoting catalytic conversion within the battery are major challenges in the development of high-performance lithium-sulfur batteries. To solve these problems, a novel composite material GO-CoNiP is synthesized in this study. The material has excellent conductivity and abundant active sites to adsorb polysulfides and improve reaction kinetics within the battery. The initial capacity of the GO-CoNiP separator battery at 1 C is 889.4 mAh g, and the single-cycle decay is 0.063% after 1000 cycles. In the 4 C high-rate test, the single-cycle decay is only 0.068% after 400 cycles. The initial capacity is as high as 828.2 mAh g under high sulfur loading (7.3 mg cm). In addition, high and low-temperature performance tests are performed on the GO-CoNiP separator battery. The first cycle discharge reaches 810.9 mAh g at a low temperature of 0 °C, and the first cycle discharge reaches 1064.8 mAh g at a high temperature of 60 °C, and both can run stably for 120 cycles. In addition, in situ Raman tests are conducted to explain the adsorption of polysulfides by GO-CoNiP from a deeper level.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/smll.202307912 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Direct Observation of Hybridization Between Co 3d and S 2p Electronic Orbits: Moderating Sulfur Covalency to Pre-Activate Sulfur-Redox in Lithium-Sulfur Batteries.
Adv Sci (Weinh)
December 2024
Key Laboratory for Photonic and Electronic Bandgap Materials, Ministry of Education, School of Physics and Electronic Engineering, Harbin Normal University, Harbin, Heilongjiang, 150025, China.
Lithium-sulfur batteries (LSBs) offer high energy density and environmental benefits hampered by the shuttle effect related to sluggish redox reactions of long-chain lithium polysulfides (LiPSs). However, the fashion modification of the d-band center in separators is still ineffective, wherein the mechanism understanding always relies on theoretical calculations. This study visibly probed the evolution of the Co 3d-band center during charge and discharge using advanced inverse photoemission spectroscopy/ultraviolet photoemission spectroscopy (IPES/UPS), which offers reliable evidence and are consistent well with theoretical calculations.
View Article and Find Full Text PDFA Dual-Functional Sulfur-rich Copolymers for Stable Anchoring and Enhanced Conversion of Polysulfide in Lithium-Sulfur Batteries.
Chemistry
December 2024
Dalian University of Technology, No.2 Linggong Road, Ganjingzi District, Dalian, CHINA.
Sulfur-rich copolymers have gained a great deal of attention as promising cathode materials in Li-S batteries due to their low cost and naturally uniform sulfur dispersion. However, the poor electrical conductivity and shuttle effect cause rapid capacity decay and low sulfur utilization especially under high sulfur loading and low electrolyte/sulfur ratio. Herein, the Fe1-xS/C dispersed and Se-containing sulfur-rich polymer (FSP) was synthesized by one-pot reaction of ferrocene, trithioiynuric acid with SexSy.
View Article and Find Full Text PDFCooperation of Multifunctional Redox Mediator and Separator Modification to Enhance Li-S Batteries Performance under Low Electrolyte/Sulfur Ratio.
Angew Chem Int Ed Engl
December 2024
Henan University, School of Materials Science and Engineering, CHINA.
Sluggish reaction kinetics of sulfur species fundamentally trigger the incomplete conversion of S8↔Li2S and restricted lifespan of lithium-sulfur batteries, especially under high sulfur loading and/or low electrolyte/sulfur (E/S) ratio. Introducing redox mediators (RMs) is an effective strategy to boost the battery reaction kinetics, yet their multifunctionality and shuttle inhibition are still not available. Here, a unique ethyl viologen (EtV²⁺) RM with two highly reversible redox couples (EtV²⁺/EtV⁺, EtV⁺/EtV0) is demonstrated to well match the redox chemistry of sulfur species, in terms of accelerating the electron transfer in S8 reduction, Li2S nucleation and the Li2S oxidation.
View Article and Find Full Text PDFDeveloping High Energy Density Li-S Batteries via Pore-Structure Regulation of Porous Carbon Based Electrocatalyst.
Small
December 2024
School of Materials science and Engineering, Zhengzhou University, Zhengzhou, 450001, China.
The mesopores and macropores within porous carbon materials help increase the surface for the depostion of solid-state products, reduce the LiS film thickness, enhance electron and mass transport, and accelerate the reaction kinetics. However, an excessive amount of mesopores and macropores can lead to increased electrolyte consumption, particularly at high sulfur loadings, where excessive electrolyte usage hampers the enhancement of practical energy density in lithium-sulfur (Li-S) batteries. A rational pore structure can minimize the amount of electrolyte to fill the pores, thereby reducing electrolyte consumption while achieving rapid reaction kinetics and a high gravimetric energy density.
View Article and Find Full Text PDFUnderstanding the Curvature Effect of FeCo Nanoalloy Encapsulated by Nitrogen-Doped Carbon Nanotubes for High-Performance Lithium-Sulfur Batteries.
Small
December 2024
School of Physical Science and Technology, Lanzhou University, 222 South Tianshui Road, Lanzhou, 730000, China.
Well-designed structures of the electrocatalyst provide excellent catalytic activity and high structural stability during the sulfur reduction reaction of Lithium-sulfur batteries (LSBs). In this study, a novel and efficient structure is developed to encapsulate bimetallic FeCo nanoalloy catalysts within N-doped carbon nanotube (NCNT) on carbon nanofibers (FeCo@NCNT/CNFs) using a combination of electrospinning and rapid-cooling techniques. The NCNT matrix with abundant sites not only serves as a high pathway for electron transport during the reaction, but its encapsulation structure also acts as armor to protect the FeCo nanoalloy.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!