Designing and synthesizing cost-effective catalysts that exhibit excellent performance of both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is a formidable task in the field of electrocatalysis. Herein, we present a Fe- and P-codoped NiS amorphous film catalyst (FeNiSP) via meticulous control over the cations and anions of metal compounds. The doped Fe and P increases active sites, reduces charge transfer resistance, and modulates electronic structures of the NiS matrix. Leveraging these advantages, the FeNiSP showcases exceptional bifunctional activities of HER and OER, with remarkably low overpotentials of only 135 and 330 mV for achieving a current density of 100 mA·cm during HER and OER, respectively. Additionally, a low cell voltage of 1.56 V at 10 mA·cm was achieved when it was employed as both the anode and the cathode for water splitting. Finally, density function theory calculations further elucidate that the simultaneous presence of Fe and P in the NiS amorphous film catalyst leads to a decrease in the band center of S and Ni. This consequential effect maintains a balanced adsorption/desorption of protons and strengthened the adsorption of O-based intermediates on the surface of FeNiSP, subsequently contributing to the outstanding electrocatalytic HER and OER activities.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.3c13210 | DOI Listing |
Small
January 2025
Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, 201210, P. R. China.
Replacing the oxygen evolution reaction with the alternative glycerol electro-oxidation reaction (GER) provides a promising strategy to enhance the efficiency of hydrogen production via water electrolysis while co-generating high-value chemicals. However, obtaining low-cost and efficient GER electrocatalysts remains a big challenge. Herein, a self-supported N-doped CoNiO nanoflakes (N-CoNiO NF) is proposed for efficient electrocatalytic oxidation of glycerol to formate.
View Article and Find Full Text PDFAdv Mater
November 2024
Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, Jinan, 250100, China.
Room temperature sodium-sulfur batteries (RT Na-S) have garnered significant attention for their high energy density and cost-effectiveness, positioning them as a promising alternative to lithium-ion batteries. However, they encounter challenges such as the dissolution of sodium polysulfides and sluggish kinetics. Introducing high-activity electrocatalysts and enhancing the density of active sites represents an efficient strategy to enhance reaction kinetics.
View Article and Find Full Text PDFSpectrochim Acta A Mol Biomol Spectrosc
January 2025
Department of Inorganic Chemistry, National Research Centre, 33 El Bohouth st. (former Eltahrir st.), Dokki, Giza P.O.12622, Egypt. Electronic address:
Kaolin, a naturally occurring clay mineral renowned for its distinctive properties, holds significant importance across various industries. The integration of dimethyl sulfoxide (DMSO) into kaolin matrices, both in the presence and absence of water, has been extensively explored for its potential to enhance material characteristics. Addressing debates surrounding the proposed adsorption mechanism for the type I structure of DMSO, this study undertook a comprehensive physicochemical characterization of DMSO-kaolin complexes (DMSO-KCs) derived from untreated (UnK) and HCl-treated (HK) Egyptian ore, with a focus on elucidating the loading mechanism facilitated by water.
View Article and Find Full Text PDFACS Appl Mater Interfaces
August 2024
Beijing Key Laboratory of Microstructure and Property of Advanced Materials, College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, People's Republic of China.
ACS Appl Mater Interfaces
July 2024
Departamento de Física de Materiales, Universidad Autónoma de Madrid, Campus de Cantoblanco, E-28049 Madrid, Spain.
Titanium trisulfide (TiS) nanoribbons, when coated with titanium dioxide (TiO), can be used for water splitting in the KOH electrolyte. TiO shells can be prepared through thermal annealing to regulate the response of TiS/TiO heterostructures by controlling the oxidation time and growth atmosphere. The thickness and structure of the TiO layers significantly influence the photoelectrocatalytic properties of the TiS/TiO photoanodes, with amorphous layers showing better performance than crystalline ones.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!