Porous carbons prepared from a novel hard wood composite waste for effective adsorption of Pb(ii) and Cd(ii) ions.

In our previous investigations, a hard wood composite (HWC) was formulated by adding rice straw, as a filler to the recycled polystyrene foam waste at mass ratio (50/50) at 170 °C and pressed under 40 kPa. Here, the disposed HWC product as a model scrap was applied for production of porous carbons enclosed with graphene sheets. To attain this approach, HWC was hydrothermally carbonized (S1) followed by either post-heat treatment (S2) or potassium hydroxide (KOH, S3) activation at 750 °C for 2 hours. The properties of prepared samples were evaluated using SEM, ATR-IR, and porosity measurements. The adsorption performance of the obtained porous carbons toward removal of lead (Pb(ii)) and cadmium (Cd(ii)) ions from aqueous solutions was investigated under different operating conditions like contact time, initial pH, initial metal ions concentration and adsorbent dose. Kinetic models such as pseudo-first order, pseudo-second order and intraparticle diffusion were used to analyze the adsorption data. Langmuir, Freundlich, Dubinin-Radushkevich and Redlich-Peterson isotherms were applied. Thermodynamics and regeneration studies were performed. The sample (S3) comprised a micro-mesoporous carbon structure encompassed by graphene sheets, with the largest total surface area (422 m g) and adsorption capacities for Pb(ii) and Cd(ii) ions of 207.9 and 119.6 mg g, respectively. The experimental adsorption data were best elucidated using Langmuir and pseudo second-order kinetic models. Thermodynamic experiments confirmed that adsorption is an endothermic and spontaneous process. Conclusively, the investigated HWC waste is a promising carbonaceous precursor for preparing effective porous graphene-carbons used in the removal heavy metals from their aqueous stream.