Preparation of cellulose acetate based flexible separator and its application in zinc-air batteries.

Flexible solid-state zinc-air batteries as a wearable energy storage device with great potential, and their separators, which control ion permeability, inhibit zinc dendrite generation, and regulate catalytic active sites, have been developed as gel electrolyte separators with high retention of electrolyte uptake. However, the gel electrolyte separator still has problems such as poor affinity with the electrolyte and poor ionic conductivity, which limits its further application. In order to further improve the electrolyte absorption, ionic conductivity and mechanical strength of cellulose acetate(CA)/polyvinyl alcohol (PVA) nanofibers, TiOwas added to CA/PVA to increase the porosity, and glutaraldehyde (GA) was used to modify the CA/PVA/TiOseparator by acetal reaction with CA and PVA to make the molecules closely linked. The results shows that the optimal mass fractions of TiOand GA were 2% and 5%, respectively. At this time, the porosity and absorption rate of the separator increased from 48% to 68.2% and 142.4% to 285.3%, respectively. The discharge capacity reached 179 mA cm, and the cycle stability rate was 89% after 7 stable constant current charge/discharge cycles.