We propose and experimentally demonstrate a four-wavelength-switchable single-longitudinal-mode (SLM) narrow linewidth thulium-holmium co-doped fiber laser (THDFL) using two polarization-dependent parallel fiber Bragg gratings (PD-PFBGs). The PD-PFBGs, fabricated using femtosecond (fs) laser direct-writing technology in a standard single-mode fiber (SMF) via a point-by-point method, are used as a four-channel reflection filter. Two FBGs are inscribed in parallel in the fiber core along the axial direction and are uniquely positioned symmetrically on either side of the centerline. This configuration enables polarization-dependent multi-channel filtering capability, which further allows for polarization-control-based four-wavelength-switchable operations of the THDFL. SLM lasing is accomplished by utilizing a simple dual-ring sub-cavity filter. An exceptional output performance of the THDFL is achieved, including an optical signal-to-noise ratio (SNR) of >72 dB, maximum power and wavelength fluctuations of 0.350 dB and 0.024 nm, respectively, and a linewidth of <2 kHz, for all four single-wavelength operations lasing at ∼2000 nm. These performance indicators suggest that the THDFL can be applied in free-space optical communication, atmospheric monitoring, and Lidar.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/OL.506241 | DOI Listing |
Commun Biol
January 2025
Department of Bioengineering, Imperial College London, South Kensington, London, SW7 2AZ, UK.
Form-function relationships often have tradeoffs: if a material is tough, it is often inflexible, and vice versa. This is particularly relevant for the elephant trunk, where the skin should be protective yet elastic. To investigate how this is achieved, we used classical histochemical staining and second harmonic generation microscopy to describe the morphology and composition of elephant trunk skin.
View Article and Find Full Text PDFSensors (Basel)
December 2024
State Key Laboratory of Metastable Materials Science & Technology and Key Laboratory for Microstructural Material Physics of Hebei Province, School of Science, Yanshan University, Qinhuangdao 066004, China.
Methane gas leakage can lead to pollution problems, such as rising ambient temperature. In this paper, the Vernier effect of a double D-shaped photonic crystal fiber (PCF) in a Sagnac interferometer (SI) is proposed for the accurate detection of mixed methane gas content in the gas. The optical fiber structure of the effective sensing in the sensing SI loop and the effective sensing in the reference SI loop are the same.
View Article and Find Full Text PDFNutrients
December 2024
Laboratório de Nutrição e Metabolismo (LANUM), Faculdade de Nutrição, Universidade Federal de Alagoas, Campus AC Simões, Av. Lourival Melo Mota, s/n, Cidade Universitária, Maceió 57072-900, AL, Brazil.
: It is unknown whether the negative health effects associated with ultra-processed foods (UPFs) are due to their nutritional composition or to the extent of food processing itself. We evaluated the impact of a test meal composed only of UPF, according to the NOVA classification, compared to a similar meal without UPF in adults with obesity. : This is a parallel, randomized trial.
View Article and Find Full Text PDFMicromachines (Basel)
December 2024
Beijing Key Lab for Precision Optoelectronic Measurement Instrument and Technology, School of Optics and Photonics, Beijing Institute of Technology, Beijing 100081, China.
Optical computing offers advantages such as high bandwidth and low loss, playing a crucial role in signal processing, communication, and sensing applications. Traditional optical logic gates, based on nonlinear fibers and optical amplifiers, suffer from poor robustness and large footprints, hindering their on-chip integration. All-optical logic gates based on topological photonic crystals have emerged as a promising approach for developing robust and monolithic optical computing systems.
View Article and Find Full Text PDFMicromachines (Basel)
November 2024
Advanced Fiber Devices and Systems Group, Key Laboratory of Micro and Nano Photonic Structures (MoE), Key Laboratory for Information Science of Electromagnetic Waves (MoE), Shanghai Engineering Research Center of Ultra-Precision Optical Manufacturing, School of Information Science and Technology, Fudan University, Shanghai 200433, China.
Vector bending sensors can be utilized to detect the bending curvature and direction, which is essential for various applications such as structural health monitoring, mechanical deformation measurement, and shape sensing. In this work, we demonstrate a temperature-insensitive vector bending sensor via parallel Farby-Perot interferometers (FPIs) fabricated by etching and splicing a multicore fiber (MCF). The parallel FPIs made in this simple and effective way exhibit significant interferometric visibility with a fringe contrast over 20 dB in the reflection spectra, which is 6 dB larger than the previous MCF-based FPIs.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!